• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1971 Charger 500 parting out - everything

Status
Not open for further replies.
How much for the tail lights
Here are photos of the tail lights- the left side has a small crack in the upper right side and one of the light sockets is worn and cracked

IMG_1410.JPG IMG_1411.JPG IMG_1412.JPG IMG_1413.JPG
 
I got everything already but the floor pan section. Could you post up a picture of the toe board drivers side there's a seem there I need about 6 " up and down off that seem edge to tunnel. How much would that cost? Thanks James
 
Took some pics today - looks like the floor was replaced at some point
Let me know what you are looking for

IMG_1414.JPG IMG_1415.JPG
 
I have a 1971 Charger 500 that I picked up to assist me with some parts that I needed for my 1971 Super Bee restoration. The car is very complete and came with:
Hideaway headlights - straight front bumper and minimal pitting on the hard to find 71 grilles
Rally gauges
Bucket seats with separate buddy seat/arm rest.
Charger 500 chrome trim
Glass
Straight rear bumper
Decent 1971 rear tail lights - one is very nice, the other has some crack - all lenses good
Interior plastic parts and soft parts
318-2 barrel engine- was running when I started taking parts off it. The entire drivetrain from the 26" radiator to the rear axle is complete. I took both front fenders off the car, but have another set of 71 front fenders with rust at the bottoms, and a clean set of 1972 front fenders.
Please contact me with any specific parts you might be looking for - like I said, aside from the headliner and rug this was a fairly complete car.
I plan on cutting the floor out from under the rear seat since they don't remake that section, and will cut off any parts you may need like the clean roof, or frame rails, etc.. I am located on Long Island in NY so plan on coming if you need one of the larger items that can not be shipped.
* side note - I haven't cut anything yet - but will soon, if someone wants the entire car make me an offer - I might be willing to sell it whole.
Chris

View attachment 436968 View attachment 436969 View attachment 436970 View attachment 436971 View attachment 436972
are lower control arms good ?price and pix
 
The AC control unit is pointing right at the end that seam I need also the a/c control unit I could us if there's no cracks on the face it looks good but kinda hard to tell
 
So how many inches up from the seam, down from the seam and to each side -there's only one shot at this and I don't want to cut too much or too little
 
I got everything already but the floor pan section. Could you post up a picture of the toe board drivers side there's a seem there I need about 6 " up and down off that seem edge to tunnel. How much would that cost? Thanks James
I am going to be doing some parts removal on the car today - let me know if you are still interested how much you want me to remove - give me a start and end point on all 4 sides since there is only one shot at it and I dont want to go too far and it cost a fortune to ship or too small and it doesn't cover the whole area you need
 
are lower control arms good ?price and pix
The lower control arms do look good but until I get mine out and assess I am going to hold off on selling them - it should be fine but I just haven't removed them yet
 
I'll go out and look at what I cut out on mine it's been awhile since I looked at it
 
It had a vinyl too but it was removed before I got it- every piece of trim was already in the trunk - ill look through my stash to see if it's there
 
OK the metal I needed is easy to fab I'll just make it. Sorry it's been a long time since I looked at that car
 
I'll pull everything out and locate some boxes, weigh and let you know.
Parts - tail lights $200
Bumper brackets - $75
But shipping won't be cheap with the weight of the brackets and size of the box and I will have to ship separately to ensure the tail lights do not get damaged.
 
Does this have the vinyl top trim piece that goes over the top of the roof? If so, I'll buy it right now.
Are you looking for the vinyl top trim for the half top? There was a full vinyl top that covered the whole roof then what I have which was the half top that went from the back of the back windows over the roof and to the opposite side. There is a chrome trim that goes over the roof and depending on the trim class either terminated there or connected to another father chrome piece that went in front of and at the bottom of the rear windows. This car did not have that one but it did have the thin chrome strip that went over the roof and terminated as a blunted round end on each side
 
Just let me know I want them.
I found the two piece stainless trim that goes over the roof for the 3/4 vinyl top option. Here is a picture - the trim is like new - not a mark on it. A little buff and it will be show quality.
Let me know if this is what you wanted and we can talk price plus shipping

IMG_1539.JPG IMG_1540.JPG
 
Status
Not open for further replies.
Auto Transport Service
Back
Top