moobster
Well-Known Member
Here is what I came up with for the exhaust on the '62.
Reminicent of the max wedge exhaust without the reversion caused by joining the muffler pipes so far down the 3" primaries.
3" stainless primaries and 2-1/2" stainless for the rest of the system.
Mandrel bent elbows, cut , fit, and tig welded together. I still need to dress the welds and polish the exhaust yet, but I think it will look ok when i'm finished.
I used some band clamps and drilled access holes in them to hold the pieces together for hot tacking, then finished welding on the bench.
Reminicent of the max wedge exhaust without the reversion caused by joining the muffler pipes so far down the 3" primaries.
3" stainless primaries and 2-1/2" stainless for the rest of the system.
Mandrel bent elbows, cut , fit, and tig welded together. I still need to dress the welds and polish the exhaust yet, but I think it will look ok when i'm finished.
I used some band clamps and drilled access holes in them to hold the pieces together for hot tacking, then finished welding on the bench.