• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Installing an Edelbrock PRO- FLO 4 XT on a 440 (Lets open the Box)

Working on the car, have it running and Boom..
1LTbcq-SEFmhO-DG70rmkF4h9UuEG-gYqcxo4CB46oukbHyoyPZzrqtRt1uMb-9g9kojkORrds0j-QMO1gQ=w732-h975-no.jpg

This little Bastard decides to jump ship!!

Luckily it is on the Passenger rear side of the block!
 
Seems like you’ve got another issue, too much pressure in the cooling system.
 
Ah, that it’ll do it.
 
can you post the part number for throttle cable. thank you
 
Oh yeah! What did you wind up doing for the intake routing...couldn't tell in the video.
 
Oh yeah! What did you wind up doing for the intake routing...couldn't tell in the video.

Still working.. I will get a picture of where I am at..

Sadly my Father passed away on Monday, so I will have to park the project for a bit.
 
Back
Top