WTB 69 RR Fenders and other Parts - Pickup at Carlisle?

[Techtone]

Looking for the following 69 Road Runner parts to buy and pickup at Chrysler's at Carlisle, Friday July 12th:

Left and Right Front Fenders in good shape
Full Floor Pan and rear Seat pans
Full Trunk Pan
R/S Door in good shape, no dents

If not going to Carlisle but are within 50-75 miles of NYC, i can pickup. Thanks

 

['68 Charger]

I have a section that includes the rear foot pans and the rear seat pans (hump). OEM rust free sheet metal. Removed from a 1966 Plymouth B Body. Here's the twist, it still has the rear frame rails attached, however the rear section of the rear frame rails have been cut off to repair another Mopar. So it's being priced as floor board sheet metal with rear frame rail sections attached. I would say about 2-3 feet of frame rail has been cut off from the rear going towards the rear axle.

I am going to be at Carlisle and I'll be setup in the swap area, however I wasn't planning on taking this piece with me but I can if you were interested. I was eventually going to drill out the frame rails but I don't mind selling as it is. I can provide plenty of pics if you're interested and we could move this to a private conversation for the details.

Thanks

 

[Techtone]

I have a section that includes the rear foot pans and the rear seat pans (hump). OEM rust free sheet metal. Removed from a 1966 Plymouth B Body. Here's the twist, it still has the rear frame rails attached, however the rear section of the rear frame rails have been cut off to repair another Mopar. So it's being priced as floor board sheet metal with rear frame rail sections attached. I would say about 2-3 feet of frame rail has been cut off from the rear going towards the rear axle.

I am going to be at Carlisle and I'll be setup in the swap area, however I wasn't planning on taking this piece with me but I can if you were interested. I was eventually going to drill out the frame rails but I don't mind selling as it is. I can provide plenty of pics if you're interested and we could move this to a private conversation for the details.

Thanks

Hi,

Thanks, what are you asking for it? I may be interested because of the attached rails, i need for patching.

 

['68 Charger]

Hi,

Thanks, what are you asking for it? I may be interested because of the attached rails, i need for patching.

PM sent.

 

[3white74]

Pm sent