Tony Tee
Well-Known Member
I need a close up up picture of the starter splash shield fasteners that mount it to the frame rail. On a 69 charger. Thanks in advance, Tony Tee.
Is this splash shield on automatics or 4 speed cars? Or on all cars?
In spite of that picture that I posted showing it on a 4-speed car, as I understand, the shield came on automatic cars only. The bolts do not have a captive washer, rather the bottom is flanged wider than the bolt head and I believe that they have knurls on the underside surface of them.
Automatic cars only as far as I have heard and seen.Is this splash shield on automatics or 4 speed cars? Or on all cars?
I bet a lot these starter splash shields were left off after replacing the starter or when they had front end work done. So if the 4 mounting holes in the frame rails are threaded? Then it had one.
The 4 holes are in the frame rail whether they were auto or 4 speed. The threads on the bolts were coarse like a wood screw. I'll pull one out of mine & take a picture of it later on.
Wrong splash shield.Those won't work for the starter splash shied... those are for the rear of the fender area where the emergency brake cable curves around. I have those. But Thanks for trying to find them for me.!
Here's mine hot off the frame rail....
View attachment 1028805
Thanks! I appreciate the time you took to post the pictures. Have a great day!
And thanks to everyone that replied ! Yay!
View attachment 1028806