tapered axle NUT

[barbee6043]

I need to chase the threads on the tapered axle, can anyone tell me the pitch of or that 3/4 inch nut?? Need to order the correct die.

 

[Red63440]

You can probably use a thread file too.

 

[Cranky]

I need to chase the threads on the tapered axle, can anyone tell me the pitch of or that 3/4 inch nut?? Need to order the correct die.

The thread OD is 3/4"? Should be a fine thread which is 16 tpi for a 3/4" diameter thread. Never messed with one but if that's the OD of it, I have a die nut......

 

[barbee6043]

That is what I was guessing. I can order one pretty cheap, Thanks