You're going to need these in your adventure:View attachment 1134907 I just purchased a 70 Charger that was in pieces and not bagged and tagged. I'll have a million questions, and for no good reason, lets start with this one. Left and Rt hand piece, where in the interior does this go?
Thanks guys, the smallest of things are the hardest
I did the same thing (bought a basket case), buying a factory service manual was the best investment I made along with joining this forum.Thanks guys, the smallest of things are the hardest
Looks like the interior window sill for the rear, side windows.
My rear window sill on driver's side:
View attachment 1134926
Thanks for that info, I got that put aside. Now, how does that plastic back window interior trim attach? It looks like it uses the pinch weld, but it seems back wards. Pics? ThanksLooks like the interior window sill for the rear, side windows.
My rear window sill on driver's side:
View attachment 1134926
I ordered them right away, yesterdayMine are out (i.e., no pictures), but going from memory the lower corner pieces are held in by small screws. The upper corner pieces are probably held in place by screws too, but I don't remember.
All of my interior trim pieces are currently wrapped up and boxed for safekeeping.
You're going to need those books in post #4 above. Might as well get them sooner than later.
Mine are out (i.e., no pictures), but going from memory the lower corner pieces are held in by small screws. The upper corner pieces are probably held in place by screws too, but I don't remember.
All of my interior trim pieces are currently wrapped up and boxed for safekeeping.
You're going to need those books in post #4 above. Might as well get them sooner than later.
Its all patience and will.Thanks guys, the smallest of things are the hardest