rustytoolss
Well-Known Member
just installed DR Diff 15/16 MC, brakes have more travel/soft than I would like. I'm sure adjusting rear may help some. I did install 2.75" calipers a while back (I'm sure that's not helping) If I were to replace the 15/16 wheel cylinder with 7/8" wheel cylinders would that help much ?
I have also thought of drilling another hole in the brake pedal to change the ratio (a bit) could help some. I've done this before . I know it will not change the PSI / will just change the travel somewhat. Thoughts
Going to rebleed to make sure that there is not any air still in the system.
I have also thought of drilling another hole in the brake pedal to change the ratio (a bit) could help some. I've done this before . I know it will not change the PSI / will just change the travel somewhat. Thoughts
Going to rebleed to make sure that there is not any air still in the system.