• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hey guys, new to me Drag Car

Bigfoots N Mopars

Well-Known Member
Local time
10:38 AM
Joined
Aug 1, 2016
Messages
303
Reaction score
572
Location
Savage
Got this car recently. Has been a drag car since 1969. Was running 11.45 1/4, 7.2 1/8. Current Engine is a 500ci low deck. Had OTB Edelbrock RPMs, Performer RPM dual plane, .510 lift cam.

pulled engine for new bearings, putting in an Ultradyne NF 69 cam. Heads getting ported and a port matched M1…

67203308-2EFB-49E8-9329-59B82592944B.jpeg 33E1352C-1608-485F-9EFA-F43AE8812CD5.jpeg 018FB979-49CE-416A-9DB4-F49326645BCD.jpeg E1A68559-EF27-48CE-8C89-3A2D15623F38.jpeg
 
Great score!! That's pretty cool. I ran the same #s in my 67 charger with the iron head 383.
They're not the most aerodynamic :(
 
Been following on Instagram, Love the color. Let me know when you come up to Brainerd. The Wednesday night test and tune racing is fun and never too crowded.
 
Great car: I wouldn't change a thing appearance wise.
 
Been following on Instagram, Love the color. Let me know when you come up to Brainerd. The Wednesday night test and tune racing is fun and never too crowded.
HELL YEAH, going to need lots of advice. Never ran at a track before!
 
Great score!! That's pretty cool. I ran the same #s in my 67 charger with the iron head 383.
They're not the most aerodynamic :(

I love the 67 Chargers , probably the coolest interiors ever! Yeah this car was not utilizing the Stroker. I think it was choked down and too much gear with 28 inch tires
 
Not sure, 3200-3300? Seemed like it should be faster. Gonna spec a better converter after we Dyno with the new cam.

Get on the scale when you get to BIR. My bet is it's closer to 3350-3550 without you, unless they took a lot of weight out since the mid'80's.
 
Got this car recently. Has been a drag car since 1969. Was running 11.45 1/4, 7.2 1/8. Current Engine is a 500ci low deck. Had OTB Edelbrock RPMs, Performer RPM dual plane, .510 lift cam.

pulled engine for new bearings, putting in an Ultradyne NF 69 cam. Heads getting ported and a port matched M1…

View attachment 1198710 View attachment 1198711 View attachment 1198712 View attachment 1198714
Nice looking car

nice score

should be a lil' quicker "now" when out next too

good luck, Happy MoParing
 
Auto Transport Service
Back
Top