Help Identifying this clip?

[zyzzyx]

Hi Guys, I keep running into this clip and have no Idea what it's for on my 1968 GTX!!!!!
As always, Thank You!

 

[440 4 speed]

Looks like it could be for cables on the heater box possibly.

 

[zyzzyx]

Nope, too big. All my heater box clips are accounted for!

 

[RemCharger]

Heater control?

 

[440 4 speed]

Nope, too big. All my heater box clips are accounted for!

Think it is also to big for w/s washer clips.

 

[Potts]

Heater control?

I 2nd that, Heater control cable?

 

[zyzzyx]

No, I just had to srip mine down to send it off to Paul's Chrome so they could do their magic!
It's about an inch and a half wide.

 

[440 4 speed]

Could it possibly be for a interior hood release cable for another year?

 

[zyzzyx]

I don't have any other cars or projects. It goes somewhere on this Beast!

 

[CHARGERSTEVEN]

Looks like a clip that would hold two lines against the under side of car,like brake line or fuel line or maybe A/C line on inner fender

 

[Beekeeper]

Looks like the clip that holds tension on the vent window pivot shaft

 

[zyzzyx]

I'll look at that tomorrow! Thanks.

 

[dadsbee]

I've seen it somewhere... but that ain't it...

 

[eldubb440]

come on man...... no evidence of any screw.......it looks like the circled tabs slide onto something, and the little ******* lock it into place.... the question is what does it slide on to?..... there is only one, correct? you sure this is off of a Mopar? is this a trick question?

 

[Beekeeper]

I've seen it somewhere... but that ain't it...
View attachment 1223046
View attachment 1223051

Well guess I had better keep brain storming

 

[Rat Rod Al]

Throw it away. Then in a couple days you will find where it went !
I know a guy that does it alot.

 

[RemCharger]

 

[WileE]

come on man...... no evidence of any screw.......it looks like the circled tabs slide onto something, and the little ******* lock it into place.... the question is what does it slide on to?..... there is only one, correct? you sure this is off of a Mopar? is this a trick question?


View attachment 1223061

 

[Grabbergreendream]

I got a 73' shell that had that bracket laying on the floor. I believe it may be for a hood latch cable but not sure. I needed the shell for framerails & metal to fix the rear of my 71. I still have that clip & it was the same color as the car so I kno it goes forward of the seats.
Good luck.

 

[BLK 68 R/T]

Looks like the speedometer cable clip that holds it down on the frame rail?