Classic Industries Disc Brake Conversion

[Timmayy]

Has anyone used this set-up? It would be for my 65 Belvedere wagon. I already switched to a dual master cylinder. I wonder about the quality and what are the replacement pads when that time comes?
https://www.classicindustries.com/p...VQ0pHAR3JcjZwEAQYASABEgJoI_D_BwE&gclsrc=aw.ds

 

[69hemibeep]

Looks the same as Right Stuff that Summit Racing sells. Single piston A-body calipers they work good.

 

[Timmayy]

When it comes to pads, is that what the replacement is? A-body single piston pads? I'm just thinking ahead. I want to be able to get the parts when it's time to replace them.

 

[R/T Boy 67]

I would get that kit from Dr. Diff, he would be much more helpful if you have any problems.

 

[ckessel]

73- a body and several other bodies. Industry number for the pads is D84. And the pads that come with the conversion are low dollar trash to keep the price point down. Get some semi metallic units.

 

[mobileparts]

Orrrrr —- if you are using any kit that utilizes the D 84 /
7017 D 84 Disc Brake Pad —- the “ A “ body Slider Pin Brake pads set ——
I have some *** N.O.S. *** Asbestos *** and a few sets of *** N.O.S. *** Asbestos *** O.E.M. MOPAR *** in the O.E.M. ***
MOPAR box !!!!!

 

[69hemibeep]

When it comes to pads, is that what the replacement is? A-body single piston pads? I'm just thinking ahead. I want to be able to get the parts when it's time to replace them.

Yes just look under 1973-89 A-bodies

 

[mobileparts]

Timmayy,
You know I have some *** GOLD *** at Copper Prices !!!!

You have gobbled up many of my goodies before !!!
Craig….

 

[jimbosride]

requires 15" wheels

 

[ckessel]

If they are 11.75" rotors. The 10.75" units sometimes get listed as 11's but they can run 14" wheels.

 

[Timmayy]

Timmayy,
You know I have some *** GOLD *** at Copper Prices !!!!

You have gobbled up many of my goodies before !!!
Craig….

What do you have?

 

[mobileparts]

It says a few comments above that I have *** Quality *** N.O.S. *** Asbestos *** D 84 / 7017 D 84 Disc Brake Pads *** and even a few sets of
*** O.E.M. MOPAR in the MOPAR Box **** Front Disc Brake Pads for the 1973 - 1976 + up " A " Body Disc Brake Pads.....
Craig ......

 

[jimbosride]

If they are 11.75" rotors. The 10.75" units sometimes get listed as 11's but they can run 14" wheels.

I believe it goes by the caliper clearance.... but not sure

 

[Timmayy]

It says a few comments above that I have *** Quality *** N.O.S. *** Asbestos *** D 84 / 7017 D 84 Disc Brake Pads *** and even a few sets of
*** O.E.M. MOPAR in the MOPAR Box **** Front Disc Brake Pads for the 1973 - 1976 + up " A " Body Disc Brake Pads.....
Craig ......

PM me

 

[chrger1967]

Yes just look under 1973-89 A-bodies

The kit that was put together in my 67 Charger has calipers and rotors from a 79-83 Dodge Aspen. And the rear disc brake setup uses calipers from a 79-85 Eldorado.