My new to me 64 Polara

[hunt2elk]

As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the next best imo.

 

[toolmanmike]

As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the second best imo.

I sent him a pm last night. I hope he has a switch left.

 

[toolmanmike]

As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the second best imo.

I would be curious as to how every other car on the road was wired so the brake lights work independently of the turn signals and is it necessary to run the brake lights through the turn signal switch. It makes sense that many cars have separate lights for each.

 

[toolmanmike]

Well some good news, I just bought a nice used Factory manual for less than $20 shipped.

 

[Dave6T4]

Give Laysons a try. They have a lot of different clips

 

[toolmanmike]

Give Laysons a try. They have a lot of different clips

Thanks, I talked to them. They normally stock them but they are out right now.

 

[Dave6T4]

How many do you need, Mike? I can dig through my stuff, and see what I have.
Dave

 

[toolmanmike]

How many do you need, Mike? I can dig through my stuff, and see what I have.
Dave

Probably a half dozen. Let me see if I can get some first before you search. I would like to get a new one somewhere so someone could possibly 3D print them.

 

[toolmanmike]

It was so strange when the molding just fell off the car.

 

[toolmanmike]

It was so strange when the molding just fell off the car.

Bump to bring this thread up to the top. I scrolled through many pages to find this again. BTW, this about the best clip I have. I need to stop down to the local nut and bolt supply to see if they have some clips close enough to work. I have been posting on a 3D printing thread on FABO and I might go that route if I can fine one clip good enough to copy.

 

[toolmanmike]

I just got my FSM. Damn, it is a nice one. And just $20 shipped. That is a steal. Classic Industries get's $65. I see some cheaper elsewhere though.

 

[440 4 speed]

I just got my FSM. Damn, it is a nice one. And just $20 shipped. That is a steal. Classic Industries get's $65. I see some cheaper elsewhere though. View attachment 1885703

Mine was well used when I got it, but it still has the required information.

 

[toolmanmike]

Mine was well used when I got it, but it still has the required information.

I need one for sure. This 64 is way different than any other Mopar I have ever owned.

 

[RemCharger]

Everything went to shite after 64

 

[toolmanmike]

I'll just put this here.