All body bumper locations and photos would be great

[Cranky]

thats letter I and a nickel

View attachment 1910415

Man....beats me!

 

[davek]

Man....beats me!

Im thinking they added those in the kit by accident. Im clueless

 

[Coelacanth]

There are 2 slots for hood bumpers right beside the hinges where I almost missed them until I looked closer. The weird-shaped ones in your picture go in the front-most slots, near your headlights, and the 2 pairs of rounded ones go in the 2 slots along each fender, with one partially hidden beside each hinge.

 

[davek]

There are 2 slots for hood bumpers right beside the hinges where I almost missed them until I looked closer. The weird-shaped ones in your picture go in the front-most slots, near your headlights, and the 2 pairs of rounded ones go in the 2 slots along each fender, with one partially hidden beside the hinge.

View attachment 1910458

View attachment 1910456 View attachment 1910457

so 3 total on each fender?

 

[Coelacanth]

so 3 total on each fender?

Yep. If you look at my earlier posts, I had 2 spares of the rounded ones (A), because I missed the slots beside the hinges. So the 4 rounded ones go rearward, the 2 weird-shaped ones go at the front. After I adjusted the nearby hood bump stops, my hood closes nice and smooth.

 

[davek]

There are 2 slots for hood bumpers right beside the hinges where I almost missed them until I looked closer. The weird-shaped ones in your picture go in the front-most slots, near your headlights, and the 2 pairs of rounded ones go in the 2 slots along each fender, with one partially hidden beside each hinge.

View attachment 1910458

View attachment 1910456 View attachment 1910457

Does it go downward, Meaning angle ? Is this a charger only because I do not have these on my Bee,no holes.

 

[davek]

So I was told that the T one is for the up bump stopper on clutch pedal. Letter I in pic

 

[Coelacanth]

So I was told that the T one is for the up bump stopper on clutch pedal. Letter I in pic

I think you're right about the T one, my car is an auto so it's unnecessary. The weird-shaped one slots in pretty obviously, there are right and left sides for that bumper. Doesn't your Bee have the same 3 rectangular slots per side, along the fenders?

 

[DeltaV]

I'll look at mine tomorrow and take pictures.

 

[Richard Cranium]

So I was told that the T one is for the up bump stopper on clutch pedal. Letter I in pic

Are you doubting my expertise?

 

[davek]

Are you doubting my expertise?

No I was informing the guys since no one knew were it went. I thank you for all your help Mark.

 

[davek]

I think you're right about the T one, my car is an auto so it's unnecessary. The weird-shaped one slots in pretty obviously, there are right and left sides for that bumper. Doesn't your Bee have the same 3 rectangular slots per side, along the fenders?

I will look again on the Bee but I did not see them on it yesterday.

 

[Coelacanth]

Let us know what you find out. I'd find it very odd if a Super Bee's hood bumpers along the fenders would be any different than a Charger's.

 

[RemCharger]

The charger hood is a big long bugger compered to a coronet.

 

[Coelacanth]

The charger hood is a big long bugger compered to a coronet.

True, but I still think there would be more than just 2 slots for hood bumpers, one on each side. If there were only two slots, and they were located right at the front near the headlights and round adjustable hood height bumper, I'd insert the weird-shaped ones there. I tried the rounded ones in front and the weird ones more rear-ward and the way I installed them is the only way the hood would come down properly. The fact that there's only 2 of the weird ones in the body bumper kit means they must go somewhere different than the other four rounded ones.

But at the end of the day, if the hood fits smoothly however you installed the bumpers, call 'er done.

 

[davek]

Let us know what you find out. I'd find it very odd if a Super Bee's hood bumpers along the fenders would be any different than a Charger's.

not on 70 Bee or Mikes 68 and 70 RoadRunner.

 

[davek]

I would think on both charger and coronet because of the daytona and superbird

 

[DeltaV]

I'll look at mine tomorrow and take pictures.

Three wedge-like bumpers along each fender of my '70 Charger. Also, one round bumper near the forward wedge and one smaller round bumper near the fender & cowl.

All pictures below are the left side of car; right side is symmetrical of course.

Forward wedge bumper & round bumper:

Middle wedge bumper:

Aft wedge bumper:

Aft round bumper near rear corner fender/cowl:

Forward wedge looking forward (2 pics):

Middle wedge looking forward:

Aft wedge looking forward:

Door bumper at lower back corner (2 pics):

***
No trunk bumper pictures tonight. Let me know if you need them too @davek

 

[Coelacanth]

Three wedge-like bumpers along each fender of my '70 Charger. Also, one round bumper near the forward wedge and one smaller round bumper near the fender & cowl.

All pictures below are the left side of car; right side is symmetrical of course.

Forward wedge bumper & round bumper:
View attachment 1911105


Middle wedge bumper:
View attachment 1911106


Aft wedge bumper:
View attachment 1911107


Aft round bumper near rear corner fender/cowl:
View attachment 1911108


Forward wedge looking forward (2 pics):
View attachment 1911115View attachment 1911116


Middle wedge looking forward:
View attachment 1911122


Aft wedge looking forward:
View attachment 1911123


Door bumper at lower back corner (2 pics):
View attachment 1911137View attachment 1911138

***
No trunk bumper pictures tonight. Let me know if you need them too @davek

That's exactly how mine are, for the hood bumpers.