• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by streetmachine

  1. streetmachine

    Heater Core Question

    Thank you again for all your help and to everyone else whom contributed in this thread.
  2. streetmachine

    Heater Core Question

    Just wanted to say Thank you. So, the core I bought does have a little corrosion on it and I believe that's due to the box getting wet at some point over the years. The relative I sent this too thinks it's bad but, I think it will be fine. The seller I bought it from has sold almost 14k items...
  3. streetmachine

    Heater box 1972 Charger Fasteners

    Just curious do you have a part number to share?
  4. streetmachine

    Heater Core Question

    Thank you. Not sure if it leaks but, the car hasn't had coolant in it for almost 20 years in it and the core is the original. I think it gets started and ran for 1-2 minutes probably two times a year. The non-matching engine lost a freeze plug or has bad one. The car isn't mine but, belongs to...
  5. streetmachine

    Heater Core Question

    Hello. I ended acquiring a spare heater core for 1972 Charger. I'm just wondering if the Everco brand is pretty decent? Also, I'm just wondering how a NOS Core would be compared to a newer one? This is for a non-AC Application. I'm assuming based on the box I'm thinking this probably produced...
  6. streetmachine

    Just Looking For Feedback For A Move (Western States)

    Hello. Just as the title states, I've had a lot pondering my mind and considering a move to a Western State. The choices I'm considering are Eastern Washington, Idaho, and Montana. So far, from what I've researched Idaho and Eastern Washington might be slightly better than Montana. Back in the...
  7. streetmachine

    Transmission Options for 5.7 swap

    Late here to the this thread. Something I wanted to add here but, on the very early 2003 5.7L Hemi Rams with the 545rfe has a separate computer (TCM) for the transmission. In 2004, they integrated the TCM with the PCM. I've read the HP Tuner won't tune the TCM nor even the later 2004-2007...
  8. streetmachine

    Chargers for sale by crack addicts

    "Shortie" Edition.
  9. streetmachine

    Vehicle Shipment Question

    Just a quick question(s). I'm looking to have a vehicle shipped from out West. I'm looking at shipping through Montway and was wondering if I should I go through their website or if I should accept their bid through uShip? My greatest concern is they charge you in full for the shipment through...
  10. streetmachine

    1971-1974 Charger Parts

    Yes. They are along with the 1971-72 Charger R/T or Rallye rear lenses
  11. streetmachine

    1971-1974 Charger Parts

    Thank you I will keep you mind. There is some older parts that was pull from an assortment of Chargers in the junkyards that was still in the junkyards in the late 1990s and early 2000s. Not sure, of the condition of them though especially lenses and such.
  12. streetmachine

    1971-1974 Charger Parts

    Thank you. A few questions. Let me ask this, how is the reproduction battery cables? Better or equal to OE? The other question is how is the reproduction parking lenses, marker lights, and tail light lenses? I'm just curious on those.
  13. streetmachine

    1971-1974 Charger Parts

    Hello. Going to try to help someone with a 1972 Dodge Charger Rallye project. I'm just wondering with regards to parts and I realize this might be a vague question but, wondering what reproduction parts are good and where NOS should be best used? What I'm referring is used emblems, trim, lenses...
  14. streetmachine

    Shock Question Regarding 1972 Charger

    Hello. I'm trying to help someone out with a 1972 Charger Rallye with 340. The car was built back in the late 80s and early 90s so it's kind of a day two car and has stockish shocks up front and air shocks back to help give it a rake with the wheels and tires it has currently. I know some people...
  15. streetmachine

    Carburetor Advice

    As the thread says I'm looking for carburetor recommendations. I was planning on getting a Holley Street Dominator and using the Thermoquad on the engine now but, got a decent deal on an old Offenhauser 360 Intake part number 5762. The other part of this equation is I'm not sure if there is any...
Back
Top