Help needed. please!!!!

rat roaster · Aug 23, 2015

Long story short. I have a 65 Coronet that I'm dropping a 511 B engine in to. For the life of me I can not get my linkage on my tunnel ram to open all the way. I have a Indy Mod Man tunnel ram with two Side ways mounted Pro Systems double pumpers. I'm running Enderle linkage. I can only get 3/4 of throttle. I have tried every thing I can think of. I'm stuck!!!!! Please help

Mopar-Charger · Aug 23, 2015

Post a picture of the linkage set up, will help us understand what you're problem is.

-Jake

Shorthorse · Aug 23, 2015

I don't have any experience with tunnel ram linkage but the distance of travel on the linkage has to change. You can either move your linkage connections closer to the pivot point or tweek your pedal mechanism to gain a longer travel.

Bigal75 · Aug 24, 2015

Look under the pedal mechanism, on my 67 there's a little tab that I was able to trim down to give more travel.

furyus · Aug 24, 2015

Shorthorse has it right.

Help needed. please!!!!

rat roaster

Active Member

Mopar-Charger

Well-Known Member

Shorthorse

Well-Known Member

Bigal75

Well-Known Member

furyus

Well-Known Member

Similar threads