• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1973 Plymouth Satellite Parts or whole?

Status
Not open for further replies.
wollfen

wollfen

Well-Known Member
Local time
11:27 PM
Joined
Feb 14, 2013
Messages
121
Reaction score
45
Location
Greenville NC
Feedback: 1 / 0 / 0
Contact seller
Hey guys I have this 73 Satellite factory 400 4bbl car that has seen better days. It has a fair amount of rust but is repairable. Thing is I have way too many projects here and i have to thin down the herd. I don't have a title as I had to chase the guy up over a period of 12 months and then when I did get to talk to him I ended up losing the phone number. Ugh. Anyway if a NC DMV search was done I'm sure one could get back into contact with the owner to do a lost title on it. Ultimately I am willing to part this or sell it basically whole, I will be keeping the disk brakes out of it but will put some drums back in to make it a roller. It has no engine or trans which was stripped out before I got it. I will also be keeping the floor change and brackets. Everything else is basically up for sale or I may sell the thing whole. If I do sell it whole without the parts already stated i would let it go for $950. Check the pics for an idea of whats in it. Has a good power bulge hood and rallye dash.
I would take $350 for the hood, probably pickup only in Greenville Nc and say $250 for the instrument cluster plus shipping.

DSCF2176.JPG
DSCF2187.JPG
DSCF2188.JPG
DSCF2212.JPG
DSCF2213.JPG
DSCF2217.JPG
DSCF2218.JPG
DSCF2219.JPG
 
Last edited:
PlagueOfBadgers said:
I see you have PM's sent. Is there anything left or is the car sold?
Click to expand...
I have a guy interested currently, but i will be posting a bunch of pics today for him to make a better assessment, if he passes i guess i will be parting it. Stay tuned.
 
Pass it to the next guy . Little to far for me for what I wanted to do . I would part it
 
Interested in the rear bumper filler corners
 
YY1 said:
Interested in the rear bumper filler corners
Click to expand...
Okay, I will see what it takes to get them off, then take pics and post them up here for you to see the condition. I will try to do that Monday, regards.
 
Okay, here are some pics of the grille and headlamp surrounds for a prospective customer. The passenger headlamp surround in the first pic shows a minor dent just above halfway on the left hand side of the photo. The right edge of the same surround shows two small sharp edged dents.
The drivers surround shows a scrape on the top edge and the last surround pic shows a very minor dent on the left hand top edge of the drivers surround. The grille pic shows the missing pieces in it.
Package deal on the lot would be $40 plus shipping.

DSCF3720.jpg
DSCF3721.jpg
DSCF3722.jpg
DSCF3723.jpg
DSCF3724.jpg
 
Here is a pic of the cast alloy vent piece for the rear defrost. There are no other pieces. $10 plus shipping. Sale pending.

DSCF3719.jpg
DSCF3726.jpg
 
Drivers seat has a weird loop mount for some reason, the passenger seat has normal mounts on it.

DSCF3718.jpg
 
Status
Not open for further replies.

Similar threads

SpicerSixty
  • Locked
SOLD 1968 Roadrunner Body with Parts
Replies
3
Views
2K
vance.dykes
vance.dykes
M
Should you save old parts or sell them?
2 3
Replies
50
Views
4K
tak419
tak419
1
  • Locked
SOLD 1963 Dodge 2 door post parts car
Replies
6
Views
919
cornpicker
C
Scott Kiger
  • Locked
FOR SALE 1968 Plymouth B body parts
2
Replies
31
Views
5K
Craig
C
haywire 440
FOR SALE Parting ‘68 Coronet 500 4-Door
Replies
6
Views
781
haywire 440
haywire 440
Auto Transport Service
Back
Top