• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

DePouli's 1969 Charger 318

Hopefully the last of the black bits...at least ones I can't do with a rattle can...

Car should be coming home Tuesday night or Wednesday morning.

IMG_20181118_125455.jpg


If you look close there is a radiator in there along with a pulley I missed earlier
 
So car is coming back next week now.

I'm planning to start underneath the car first. Off my head I plan to install

1. Gas tank,
2. Fuel lines
3. Brake lines,
4. Starter
5. Exhaust (got a dual setup even though it is a 318)

Gonna save the trans cooling lines and the driveshaft until later. The trans lines cause I don't have repros in hand yet and drive shaft cause I don't want to mess with the trans linkage yet and thus want to keep the car easy to roll. Come to think of it though maybe I leave the exhaust off on that side for access to the linkage.

Does the forum have any lesson learned in terms of the best order to do these in or any reason I should NOT wait on those couple items. Just trying to avoid doing work twice or making it tougher to do later work ( i.e. the exhaust versus trans linkage). Thanks in advance.
 
thats awesome. looks like our cars were in the booth at the same time. lol. heres my new color
Resized95201811209518074795255.jpg

Resized95201811219510205895906.jpg
 
Getting close windshields are in.

Got to touch up a couple areas.

They are gonna assemble then sand and buff.
IMG_20181129_132147.jpg
IMG_20181129_132155.jpg
IMG_20181129_132203.jpg
IMG_20181129_132213.jpg
IMG_20181129_132815.jpg
 
Worked on the headlight panel some. Just to do something.

I had been saving a nice set (well I thought it was a set) of T-3 Headlights. Turns out I have gobs of Hi beams and only one Hi Lo. Then when I went to get another I discovered T-3s we're for GM cars...so... Undecided at the moment.

Also need to get some screws for the trim rings as I only had 6 correct ones. Also broke one trim ring so need to snag one of those...

Not the most productive work but learned some new things...
IMG_20181201_134919.jpg

IMG_20181201_134938.jpg
 
Last edited:
That is such a beautiful car you have there Brian. Are you going to be putting a vinyl top on her. You are now up to the most enjoyable part, have fun.
 
You must log in or register to reply here.

Similar threads

RT SE 440
1969 Charger R/T SE
2 3
Replies
48
Views
4K
MarPar
MarPar
Chargerjase
70 Coronet Winter Odd Jobs
2
Replies
26
Views
1K
Chargerjase
Chargerjase
6
1969 Charger Tail Light Finish Panel or Just Paint?
Replies
12
Views
2K
Bob Lynch
Bob Lynch
rklewis1005
Alan's 1970 Charger Restoration
2
Replies
24
Views
982
rklewis1005
rklewis1005
Dean Prevolos
FRont and Rear Bumper Installation oin 67 Charger
Replies
4
Views
252
Dean Prevolos
Dean Prevolos
Auto Transport Service
Back
Top