66 to 67 Satellite grill swap

Ben Simpkins · Sep 30, 2020

I want to swap the grille on my 66 to 67 grille and I had some questions. First will I have any issues with the grill and headlight bezels lining up? and will I have problems with the headlights since a 66 has one headlight and blinker per side and the 67 has quad headlights?
Thanks for any feedback.

BeepBeepRR · Sep 30, 2020

Pretty sure they will not swap over. The 66 has a single headlight bucket and the 67 has dual headlight buckets. The ends of the 67 are rounded for the additional headlight. And its shorter. I converted a 67 fender over to a 66 but had to cut the headlight buckets out of both and graft the 66 into the 67 fender.

1966

1967

R413 · Sep 30, 2020

Yes you will have problems. Unless this is a race car without functioning lights. The 66 has 2 large headlights, the 67 has 4 small ones and the headlight bezels won’t cover them. The park/turn lights need to be moved from the grille to the bumper so you need different. Wiring for all this to function.

Going to need 67 headlight buckets which are welded to the fenders. You need to top latch panel because the 67 grille mounts to it and it bolts to the Top inside end of the headlight buckets. This is quite the project if you want it to look factory. If not you could make brackets and fake it.
EDIT, the hoods are the same, they swap just fine. I’ve put a 66 hood on a 1967.

66 Sat · Sep 30, 2020

As said above, not an easy swap. Different front bumper too, or somehow cut holes in the 66 bumper without ruining it. I painted my 66 grille to replicate the 67 look somewhat as I preferred the look against the color of my car.

Fran Blacker · Sep 30, 2020

Think hood would need some work where headlight cut outs are. like 66 Sat changes.

Fran Blacker · Oct 1, 2020

Wonder if you converted to road lights like on ebodies in parking/signal lights? Then install see the link, in the upper corner of the grill on the backside of grill for signal/parking lights. https://www.ebay.com/itm/Front-Rear...637614?hash=item289e9acf6e:g:kokAAOSwrxBfThK- not mine.

YY1 · Oct 2, 2020

66 and 67 hoods interchange. No issues.

Best bet might be to find a rusty 4 door 67 parts car for the grill, bumpers, top plate and fenders.
Then part out the rest of the car.

As stated above the headlight buckets are different and welded.
The spot weld locations are on the very edge of the inside curve, making them very challenging to drill or grind out.

66 to 67 Satellite grill swap

Ben Simpkins

Active Member

BeepBeepRR

Well-Known Member

R413

Well-Known Member

66 Sat

Well-Known Member

Fran Blacker

FBBO Gold Member

Fran Blacker

FBBO Gold Member

YY1

Well-Known Member

Similar threads