• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

68 Charger quarter panels

RJ Squirrel said:
Thanks! It is tough to tell just what the hell it is now with all the body panels off. But most people under 50 dont know what they are anyway
Click to expand...
Hey!! I resent that! I had my '68 Charger at that same exact point about 12 years ago when I was 30! However, I don't totally disagree with you. I harped on my old man for years about getting a 68-69 Charger when I was younger. We finally bought one when I was 15 in 1998. None of my buddies had the love for old cars like I did. They thought it was cool when they saw it but it never sparked an interest in any of them.
 
RJ Squirrel said:
Thanks for the replies.
I am replacing the tail panel and valance too, so thinking now skins only wont work at the aft end where they meet.
Does the full quarter, tail panel, and valance make the entire outside corner? Is there another part in there? I can not tell mine is pretty bad shape
on one side and the other side is missing.
EDIT: I found the AMD valance end caps
Click to expand...
when doing your quarters make sure you do your outer corner caps before the lower valance. Almost impossible to weld to quarter

imagejpeg_0 (16).jpg


20240702_191554.jpg
 
RT68440 said:
Hey!! I resent that! I had my '68 Charger at that same exact point about 12 years ago when I was 30! However, I don't totally disagree with you. I harped on my old man for years about getting a 68-69 Charger when I was younger. We finally bought one when I was 15 in 1998. None of my buddies had the love for old cars like I did. They thought it was cool when they saw it but it never sparked an interest in any of them.
Click to expand...
Great story! You are an old soul.
I get nothing but blank stares when I talk about the bird and the charger around here
 
Making good progress, frame rail ends blasted, primed and tacked on, stiffened it up nice attaching the trunk floor with a bunch of clecos and some screws drilled up through the bottom to mark all the flanges.



IMG_1832.jpegIMG_1835.jpeg
 
Pretty happy with the first test fitup of a panel, the overall length is right on, lines up everywhere fairly good so far


IMG_1833.jpeg
 
Yeehaw this is more fun than brain surgeonen and doudle naught spyin
Uncle Jed!

IMG_1839.jpeg
 
Well I am gonna need to hang the doors before I get too happy assed carried away. They are going to need some work first.


IMG_1840.jpeg
 
My first trial fitup with a new set of hinges went better than I expected, this car was never wrecked apparently. Everything is lining up real good.
Next step drill a few hundred holes and weld er up

IMG_1845.jpegIMG_1844.jpeg
 
You must log in or register to reply here.

Similar threads

'68 Charger
  • Locked
FOUND FOUND.....WTB quarter glass tinted driver's side 68-70 B Body 2 Dr hardtop (68 Charger).....
Replies
1
Views
278
davek
davek
A
1969 Super Bee quarter patch panels
Replies
6
Views
4K
andrewwoz
A
hashmaker
  • Locked
SOLD 1968 Charger w/Hemi, 5 speed manual, Dana 60
Replies
4
Views
3K
EmitRDetsaw
E
Rook
Rook's 68 Charger - What have I gotten myself into this time?
2
Replies
27
Views
2K
ckessel
ckessel
J
1968 - 70 Charger Quarter Panel Interchange
Replies
4
Views
2K
JPWally
J
Auto Transport Service
Back
Top