• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1970 Coronet R/T Project (Dasfusca's Car)

1 Wild R/T said:
My guess is your motor and arm don't belong together...
That appears to be a two speed wiper arm... What motor have you got?
Click to expand...
3 speed motor, 3 speed switch, I think the linkage is the one that was on the car. Eldubb440 provided a pivot but I think I kept the actual arms separated. I gave the parts I didn't use back to him. Any pic of the 3 speed linkage arm handy? Part number?
 
The arm is 2822273 but the linkage that travels over to the wiper post is also different....
 
1754323788631.png


70 3 speed linkage..
 
I worked on the AC. The rubber lines would land on the exhaust manifold, so to stop this, I am making a bracket out of a heater hose holder. Same job different side of the engine. I had to fabricate a twisted mount to support the the lines. I am attaching it to the exhaust manifold. Didn’t want to use the valve cover bolts. I will post a picture of the bracket when it's finished.
IMG_1717.jpeg
IMG_1716.jpeg
IMG_1715.jpeg
 
Last edited:
I got this wheel for the R/T years ago. It’s a 1968-69 wheel that is all original and unrestored. This might be too nice to put on my r/t. It has no cracks and unpainted chrome. I’ve been saving this wheel
IMG_1714.jpeg
for 20 years waiting to put it one the car. I am not sure I have it in me to drill 1970 holes for the ring.
 
DasFusca said:
I got this wheel for the R/T years ago. It’s a 1968-69 wheel that is all original and unrestored. This might be too nice to put on my r/t. It has no cracks and unpainted chrome. I’ve been saving this wheel View attachment 1898040for 20 years waiting to put it one the car. I am not sure I have it in me to drill 1970 holes for the ring.
Click to expand...
Trade it off for the correct one then.
 
I put a notch in the classic auto air control so I use the stock lights. I made a harness for the new lights with a donor car’s wires so they can be plugged in without altering the original harness.

IMG_1749.jpeg


IMG_1750.jpeg
 
You must log in or register to reply here.

Similar threads

crahill39
69 Coronet R/T Project
Replies
5
Views
221
71RRHI
71RRHI
R
1970 Road Runner Project
2
Replies
28
Views
2K
GB5andGY8
G
nitro_rat
GG1 '68 Coronet R/T 4-Speed
Replies
19
Views
2K
nitro_rat
nitro_rat
S
My FY1-1970 Super Bee-4 speed, A31-project!
Replies
7
Views
754
ckessel
ckessel
G
My '68 Coronet R/T project
Replies
0
Views
171
Godscountry440
G
Auto Transport Service
Back
Top