donm
Well-Known Member
Ready to be done with the body work stage, end finally in sight
69 Satellite
- Thread starter donm
- Start date
donm
Well-Known Member
Its been a learning curve, thats for sure
donm
Well-Known Member
Passenger Side some light filler work, epoxy and blocked, added two coats 2k over that to do the final block with. Will do that later this week. Couple small low spots on the driver side, spot sprayed to level out those. Finally on schedule for once.
ckessel
Well-Known Member
Rolling the car around on those rocks must be fun. 2+ person job for sure. Looking good!
donm
Well-Known Member
Yeah its a bit of a stuggle, especially now with all the body parts on. The boards work pretty decent
donm
Well-Known Member
Pass side 320/400. Also 600 wet just in case. Just need to 600 wet the hood/trunk and Driver side. This week will get those done. Will paint the underneath of the hood along with trunk floor and inner trunk lid next weekend. The weekend of 4 Oct paint is getting sprayed rain or shine(fingers crossed for fair/good weather that weekend)
- Local time
- 3:26 AM
- Joined
- Jan 16, 2011
- Messages
- 77,642
- Reaction score
- 123,672
- Location
- NorCal Sierras
Looking pretty good, come a long ways...
what happened to 8 months deal ?
just kidding
cool color too, B3 (?)
cool 69 Satellite,
should be fun with the suspension mods & a "lil" power
a lot of lil' trick stuff
what happened to 8 months deal ?
just kiddingcool color too, B3 (?)
cool 69 Satellite,
should be fun with the suspension mods & a "lil" power
a lot of lil' trick stuff
donm
Well-Known Member
SW atx line chip for the modern "b3"Looking pretty good, come a long ways...
what happened to 8 months deal ?
cool color too, B3 (?)
cool 69 Satellite,
should be fun with the suspension mods & a "lil" power
a lot of lil' trick stuff
Yeah the time line......I think mabye the # 1 in front of the 8 wasnt working then. Haha
donm
Well-Known Member
Busy weekend. Got all the inside areas in paint along with the jambs on the doors, trunk, and put chip guard on the underside of the rocker and shot it. Not enough room in the garage to open doors or crawl under while painting the exterior, so might end up with some slight tape lines but thats fine. Kinda dark in the garage so its hard to get a good shot of the color
Similar threads
