Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need a rebuilt or at least a functional power steering pump for my 64 Polara (with brackets if possible). It currently has a TRW pump. Thanks in advance for any assistance.
I purchased the headlight relay system from @Crackedback a while back for a 1964 Polara and am just getting around to installing it. I've read in other posts that instructions were included however I can not locate them.
I tried messaging him directly but his inbox is full.
Would anyone be...
I ordered a nice new package tray from Classic Industries. The pre-punched holes for the two attachment clips are in the wrong spot which isn't a big deal.
My big question is do I need to install the tray before or after I install the rear glass?
64 Polara Rear Quarter window glass supports. These are what the quarter glass is bolted to. Both the drivers and passenger side. When I took the glass out of the car years ago the bolts snapped inside the pot metal supports.
Has anyone ordered a front brake line set from Inline Tube that actually fits? I ordered a compete set of fuel & brakes lines. The fuel & rear brakes lines were PERFECT and easy to install. The front break lines are not even close to fitting. In the drawing on their website it shows the brake...
I was hoping to be able to reuse the steering column on my 64 Polara but coupler is just shot. I also know that rebuild parts are non-existent.
I would like to keep the original steering column and I am hoping there is a simple solution like using a different coupler. Please help!
Thanks ...
I purchased a 4-speed pedal setup for my 64 Polara a long time ago and I am just getting ready to install it. I started by getting it cleaned up and painted but when I started to examine it it a little more closely I realized that I may not have the correct assembly. I appears as though the...
FYI ... Just got off the phone with the wife of Joe Suchy. Apparently he had some heart issues after he returned from Carlisle. Hopefully he should be home tomorrow. PRAYERS!
Found this on the local Phoenix craigslist. Somebody really needs this.
https://phoenix.craigslist.org/nph/clt/d/white-mountain-lake-mopar-express-train/7328936768.html
Our governor put us under a curfew from 20:00 - 05:00 ... I was on the 101 freeway at 04:55 this morning ... doing 68 in a 65 zone ... without my employer supplied hall pass ... I had a full tank of gas, half a pack of cigarettes, it was dark and I was wearing sunglasses. BOOM!
I need help with the floor pan fitment on my 64. I have it in place and it fits very well everywhere except for where the tunnel meets the rear floor pan. I have tech screws in there put still can not get it to align very well. The gap is anywhere between 1/4 & 3/8.
Any suggestions would be...
I have the new floor pan temporarily set into place and the tunnel hump positioned in what I believe to be the proper location. It appears as though I will need to cut the floor pan beyond the cross member to install or am I missing something?
Will I need to cut/install the hump before I weld...
These showed up at the building I work at in North Scottsdale. I immediately told them they were trespassing on private property and would be required to confiscate their vehicles. They just laughed at me and drove away.
This came as part of a craftsman chisel set between 1949 - 1964. It is a cold chisel but I can not determine it's particular use. I am baffled by the rounded front edge and the 45 degree bevel.
Does anyone have any ideas?