Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So what brand of oil do you use in you engines? I use the Joe Gibbs DRIVEN HR-2 High Zinc 10W-30 and it seems to be good. What do y'all think? Just some pics of my love to enjoy while we discuss this =P
Good morning,
Couple oil questions. I have a 67 Coronet driver with a 383 4 barrel that I bought last year. So far, I drove it around 1000 miles. I am in Massachusetts so it doesn't get driven much in the winter.
1. Do you change your oil every year? Regardless of how much you drive it?
2. What...
I just put 10w-30 in my 1969 383. I’m not sure whatoil was in it before but I didn’t seem to have any issues. I hooked a mechanical gauge up and the line filled with oil and held 75 at cold temps. However, when the engine is cold now at idle I hold 28 pounds and the oil line to the gauge won’t...
Hey guys,
I just got a "new" to me 1968 Charger with a "rebuilt" 383. Come to find out the guy I got it from had 0 idea on how to build the car and did a lot of things very half assed.
The oil pressure gauge in the car doesn't work so hooked a mechanical gauge to it. I think the car sat for...
Has anyone used Driven conventional gear oil 04530 in their 4 speed ( A833 ) tranny, or Redline MT90, had my tranny rebuilt and just wondering what is the best oil.
Thanks
Today I stumbled upon a small stash of UNused oil in bottles that had no date code on them but did have the SAE API circle with ratings of SD and SF.
I thought that I was told that the higher in the alphabet the second letter was, the higher the detergent level.
In short, an oil like this...
I'll cut to the chase.
500 low deck stroker. Broken in on the Dyno plus ~10 power pulls after that. All systems go. Timing set perfectly.
That was last June. The engine has been sitting since then with monthly manual roll overs.
We will fire it for the first time in the car this weekend. Should...
Has anyone heard of or used Harvest King conventional 90W API GL 4 gear oil in there A833 4 speeds and if yes what is your opinion of it's quality when used in a 1960s Muscle Car?
I had a 318 short block built for me and I purchased a Melling M-72 oil pump separately. When going to install the mounting neck will not fit and I don’t want to force it. I check with my junker short block and it fit. The new rear cap is stamped 5-31 old (which fits) is stamped 1-31 can someone...
Hey all,
I have fully rebuilt my 1966 Charger. I rebuilt the wiring harnesses as well, nose to tail. Everything is up and functioning except the Temperature and Oil Pressure gauges. Both sensors are NEW.
I think I should be getting about 5v at the sensors since the wiring diag. shows 5v. What...
I have a pretty big system. Ingersol Rand going to 4 Flexzilla spools. No oil is being purposly introduced. Regulator only.
Very recently I noticed a very clear oil all over the lines on the spool. Honestly all 4 spools to some degree, some more than others. Its a "glaze" of it. Also its...
...to Valvoline 50w racing oil. If the motor was so worn out that it still didn't have enough oil pressure we would go to a high volume pump. That never failed to cure it. Even if the bearings were worn down to the copper. So what I'm trying to say is the motor decides whatoil you will use. Not...