Search results for query: *

I was just considering today on upgrading my rad for a aluminum unit and just realized my rad is a small block rad? I didn't know that there was a difference? I never really had any overheating problems with the 383 but the temp would start to climb in stop and go traffic. With the new stroker...

Hello just wondering if anyone has the push button 727 gear selection procedure for 63 and the 64 I have heard they are all different from 62-65. My trans could be a late 63 or 64.

Just wondering if there is a trick to getting the reverse light bezels off. I removed the two nuts from inside the trunk and can't seem to get the bezel on the outside off? I don't want to brake anything so I thought I would ask for some help.

Just wondering if anyone has upgraded there voltage regulator to electronic? I was wondering if this solves the alternator gauge bounce when charging?

Just wondering how to remove the power steering reservoir from my 64 polara? Looks like it must press on? Is there a special tool required? Also when ordering the seal kit it ask if the shaft is hex/slotted or normal? I'm not sure what that means.

hello just wondering if anyone is running a edelbrock performer rpm intake on a low deck B block with the stock hood? If so any clearance issues?

I just order a set of tti headers angle plugs for my 64 polara. Just wondering what plug wires will fit the best? 90' straight or 135' ends? I didn't see any suggestions on tti web site. Thanks for any help.

Hi guys this is a fairly new channel on YouTube called Nicks Garage. They just finished installing a 505 hemi in a 64 polara and I have never seen the push button installed on the right side before? Just wondering was that a Canadian option or was it just moved for the manual valve body? He has...

Guys I have been having a intermittent no start problem off and on since I got the car. At times hot or cold the car just roles over, then if it does start it seems to start as I left off the key? I have replaced a lot of the ign parts, coil, cap, rotor, has patronics ign, ballast resister...

Well we will see if this works.

Quick question do the rear leaf springs that mopar has for B body's fit the early 62-65 B body's?

Does anyone have a pic of a stock air cleaner for a 1964 dodge polara with a 383 four barrel carb?

Hi guys, I got my father a new repop steering wheel for his 1964 polara for Christmas. I was wondering how to get the horn pad and ring off? I don't want to damage the 50th anniversary badge in the centre by mistake. Thanks