Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have the original front sway bar off of my B body.
Fits 62, 63, 64, 65 B-body Mopars.
All hardware is included and in good shape. The rubber bushings are good except the little round ones on the vertical mounting rods. I was just going to use shock upper bushings for those. Just didn't end...
I have an Edelbrock STR 14 intake with 2 different top plates. Cross ram and single 4 barrel.
I didn't see any cracks and doesn't appear to have been ported. Also have 2 new gaskets for top plate to intake. The cross ram top plate had 2 cracks (probably from a backfire) that was professionally...
Looking for a Claude Short Dodge License plate frame. It was the dealer where my T/A was sold new in Santa Monica California.
Any help would be greatly appreciated!
Jeff
The steering wheel wont return to center because you have no positive caster. I bet it wanders down the road and follows every crack or ridge in the freeway too. For a regular street car I would put 3-4 degrees of caster in the front end and it will drive awesome. The QA1 a arms will do this...
I put the QA1 arms on my '62 and ended up getting +5 degrees of caster with camber at -1 for drag racing. It had tons of adjustment over the originals.
I have an Edelbrock STR 14 intake with 2 different top plates. Cross ram and single 4 barrel.
I didn't see any cracks and doesn't appear to have been ported. Also have 2 new gaskets for top plate to intake. The cross ram top plate had 2 cracks (probably from a backfire) that was professionally...
Hey Guys!
So I got this set of 3447 air cleaner bases. Label says they are originals, and I know the guy that I got them from and he knew his parts. Unfortunately I cant ask him about them because he has passed away. I haven't had a chance to pull my repop aircleaners off my car to compare...
I restored the upper control arms for my 62 B body and we couldn't get the alignment where I wanted it for racing so switched to aftermarket stuff.
They got blasted and painted with cast blast, new Moog Ball joints and new Moog bushings.
They were on my car for less than 100 miles.
Perfect...
1965 727 auto trans for big block
This is the one year only, hard to find big block, cable shift, with the slip yoke type driveshaft.
$450
Located in Southern California.
Thanks for looking! Jeff
Ok! I pulled the cover off of this Dana 60. It has 4.56 gears and a clutch type posi in it. Posi has a '69 date code on it. It looks like 10" brakes but I forgot to measure them to verify.