Search results for query: *

Next issue, I put my LCA back on reinstalled the torsion bar and adjusted, but the control arms sit on the bump stops, and the adjusting screws are all the way to the bottom of the LCA. When I pulled the LCA I pulled then completely out, welded up the stiffener plate on and then put new...

Hi again all. I am trying to take the two pedals out and put in the 3 with the Hyd master cyl on the firewall. Does anyone have good pics, I have the willwood master Cyl that comes with the MCcloud kit, but not sure if I have to drill a new hole for the rod or am I not looking in the right...

Looking to see what anyone has done to change the front brake hose for a 71 Charger. I have gone to every shop and Napa has 1 stock style on island, but I need both front. Has anyone changed to a newer style with banjo bolts or have another part number I can give NAPA to see if they might...

I have everything out and all parts acquired. I am trying to get the pilot bushing in the crank hole and have split 2 pilot bushing trying to get them in. What am I doing wrong. This is the last thing I have to do is get the clutch/pilot bearing in. from what I remember is that you either...

Hi all In need of some information on flywheel bolts. I am doing a auto to manual conversion. Have most of the parts, but are the flex plate bolts and the flywheel bolts the same? If not does anyone have a set to donate or buy, but had to be fast because I have to ship the car in 30 days to...

Any good or bad news on the Jeep diesel wrangler (4 Door) I can only find stuff on car and driver. They are so few and far between to find i am looking for real world information. my wifes highlander hybrid is acting up. Talked to the Jeep dealer and might order a 21 leftover. the dealer...

Hi. Looking for a hyd conversion kit for 4sp with Hyd throw out bearing set up. It will be going on a 318 23spline. Thanks Todd

So I am looking at getting a shop built on my property. It is a 30 X 40. nothing crazy. I am looking for advise and anyone that has a company for the best prices. I want to put a lift in it, so I am thinking 12 foot walls. Right now I have a quote for 10 ft walls at 14500 12ft at 15200...

I am in need of manual shift linkage or rods. Seeing if anyone has a set that they dont need anymore. coonverting my duaghters 71 to an 833. Thanks Todd

So I think that these are two different types of cars... shouldn't be ran together, and they sandbagged the 1/4.. just thought it was a fun watch...

I hope I am posting in the right spot. I am trying to do a new construction of a new home. I can use my VA, and some banks offer VA construction loans. I am looking for a bank that does that, not a bank that will give me a construction loan and refi into a VA loan. Any suggestions let me...

So I bought my daughter a 71 Charger and need some help. I have bought lots of stuff, but need to see the inside of the front fenders. The rockers are rot, the 1/4s behind both rears are rot and the front fenders behind the wheels are rot. The driver front frame has cancer. I have a welder...

http://www.msn.com/en-us/news/us/pro-trump-waiter-refuses-to-serve-oakland-as-player-who-knelt-during-anthem/ar-AAtZjUd?li=BBnbcA1 Good On the waiter, bad on baseball.

I'm looking at picking up a 16 Hellcat that has a TX - NONREPAIRABLE TITLE. I had my brother in law go look at it and looks good. The damage was of course flood. The water didn't get inside and was to the bottom of the door (from pictures, who know if that is true) but insurance was so kind...

I am looking for a picture of the inner fender where the hood hinge connects. I have rust on inner fender and I need to looks like it is all the way through. Is there a big hole with the heavy plate behind it holding it together or is it just the bolt holes with the heavy plate behind it...

I used the search and couldn't find the info. I was wondering if anyone has changed the front spindles to the nev version where the hub bolts onto the spindle so. This would allow the use of newer brake systems and newer wheel setups. I hope I explained what I was thinking. I will attach...

I was looking for stuff and ran across this. Figured I would post in case anyone was looking. https://dallas.craigslist.org/dal/cto/6055296065.html

I am looking to buy the clutch pedal assembly and any other items that i would need for a 71 B body. I am going from an auto to a manual. Thanks

I just picked up a 71 Charger 500. Never got to look at it before purchase and shipped it out here. The front end feels like i am driving a canoe. All over the place. Lots of play in the steering wheel, pull to the left then will float right. Where is the best place to purchase all the...