Search results for query: *

I'm wondering if you really need to run a "mellonized" intermediate shaft gear on a Hydraulic Roller cam. The cam is from Howards and they are telling me the Milodan 21505 would work just fine. Talking to 440 Source and they are saying mellonizing is an absolute must. So whats the deal? I want...

Looking for a Performer RPM dual plane manifold for a 440. Preferably used. Thanks!

Looking to see if anyone has a 7 blade 18" fan they want to part with? This would be attached to a 440. I want to be able to bolt it to the Hayden 2947 fan clutch. Thanks!

I'm curious if my loggin works with abodiesonly or ebodiesonly. I need to PM someone on ebodiesonly and just wondering if I need to sign up over there as well?

Hey All - Looking to replace my stock timing cover on a 71 block (internally balanced). It appears to have the stock timing cover with the timing tab attached. I'm looking at the milodon 65650 and wondering if I need a timing pointer like 440source sells (part #: 121-1063). My other option is to...

I have installed a new Borgeson box and pump setup and a decent sized cooler. When the engine is cold and warming up, everything works great and it has great feel, but after a little driving the steering is tough to turn at a stop but easy while in motion. I figured this was due to heat, so I...

Curious if anyone has run this intake in the past? I got one with the engine I just picked up and I think I'll give it a try but I cant seem to find much info online about it. It's this or a Holley Street Dominator that I've been running for a while now. Just trying to see if they are worth even...

I have a pair of 906 heads that appear to be untouched and have newer valve springs installed. Not sure what brand springs but the motor had a big cam and the car ran great. They do have the heat exchange ports on the intake side. I'd like to keep this local pickup only. Asking $200.00 for the...

I have a simple question and I cant seem to find it anywhere on the net. When installing a new bronze bushing for the intermediate shaft on a 440, how should the slots be positioned? Does it even matter? Looks like there's two slots on top and then a slot on the inside down the center. I'm...

I know this has been beaten to death but there is so many combo's out there and I cant find anything that's up my ally. I'm looking for a Hydraulic Flat Tappet Street/Strip Cam suggestions. I'll list my specs below. I just want a nice cam that will be lumpy(110 or 112 Lobe) and create good...

I'm just curious your opinion on what a used 833 23 spline (pulled working fine) 4 speed, 11" bell housing, 143 tooth flywheel; setup for a cast crank 440 & crossmember would be worth? I also have 2 shifters(Non console) & all the Z bar stuff as well that would go along with it. All you'd need...

I'm wondering where everyone gets the lightweight hood springs when going from a metal hood to a fiberglass hood? I want to keep the OE hood latch system and not do pins. This would be on a 68 Coronet with the stock meal hood going to a 69 six pack fiberglass hood with the hood scoop. Do you...

So back in August I installed the Borgeson steering conversion box. Got all done after 2 days and took the car around the block to make sure everything is good to go. I get back to my buddies place and pop the hood and as I'm listening to the valve train click away I rev the engine up just a...

Hey Guys - I ordered the Borgeson box kit which includes the power steering pump and hoses and then the Burgman coupler (Which is back ordered for 2 weeks :( ). Now the Borgeson replacement pump is a press on style Saginaw and I'm worried that I'll have belt alignment issues. Has anyone else...

I'm just wondering if the bolt on Saginaw style pump is interchangeable with the press on style? Swapping to the Borgeson box and changing to a press on style pump and I'm not 100 % sure the belts will all line up.

Hey Guys - I cant seem to find the lowers radiator hose size anywhere. I know my Champion Radiator lower connection is 1-1/2" and I believe the connection at the water pump housing is a 1-3/4" but I want to make sure. Anyone know?

Hey Guys - I'm getting ready to do a Firm Feel stage 2 or 3 box and I want to change everything between the box to the steering wheel. What all do I need? I have a nice wheel but I want to change the column and shaft etc... Who sells a nice power steering column that is bolt in without the...

I think I know the answer to my question but has anyone seen the dist intermediate shaft bushing start to break apart and end up in the oil as ground up flakes? I cant think of anywhere else in the motor I'd find bronze material that would end up in the oil. It didn't come out of the pan while...

Looking for a pair of cutouts, nothing fancy. PM me!

What vendors sell TTI headers from this site? Trying to find the best deal possible. Thanks!