Search results for query: *

Were to get gravel or mud flaps for 69 Plymouth roadrunner. Would like something like chrome or stainless steel. Or maybe I can get something in a black that I could paint. Starting to see chips on wheel opening to the back on the rear quarters. Don't like it and trying to find an answer. Thanks...

While driving my Roadrunner yesterday. Was running fine the 383 was humming along then it started braking up and shut down. Pump the pedal and it fires but dies. Tried several times to get it to run. Same over and over. It fired but just died. Have fuel in the site glass on the new Holley...

So, the first real trophy. This might have broken the Ice. LOL.

Things went south with the runner for a while. First rad fan took out the radiator. Then cracked head on driver's side. Put on a set of 440 source heads. Then a partiality filter blew out. Now trying to dial the motor back in with the new 650 Holley brawler four-barrel single pumper. Back on the...

I get these paper gaskets for between intake and head. Have just installed the valley pan without using those. Do I need to use them. four of them figured one between the pan and head and the other between the intake and pan. Any thoughts appreciated. Blue.

So here is the deal. Had a cracked head and got another one done at a shop. Put it back on the car. Have a new 26-inch radiator 3 core. 7 Blade fan. Shroud. Now the motor runs really hot. It did not ever get over 190 degrees while driving before but did get to 210 in stop and go traffic. At a...

So where should Number one wire be when looking at my distributor top left or right. Been looking for pictures but having problems finding them. Thanks for help. Blue

So I know this has been asked before but here it goes. Running 15X8 Cragar rims with back set of 4 1/2 inch now. Uni lug not happy with them. Want direct drilled but can only find them in 4 1/4 back set. Will these work. I am afraid of not having enough clearance. 69 Plymouth Roadrunner. Don't...

They are in good shape and have good studs on them. I just swapped out them to a set of 69 runner ones. They came with my runner hood and finally got the right ones. Painted B5 blue. Just wondered what they are worth or what is a fair price for a good set. Thanks Blue

Ok I left the stop sign and did a burn out while making a left-hand turn. It was a good burn out. Now I have a vibration noise coming from the rear of the car. Feel it in the seat. Have not checked it yet but thinking U joint or maybe a wheel bearing problem. Have green axel bearings. Have heard...

So now the motor is back together and fired it up. The hydraulic lifters rattled a little then quitted down. It seems to shutter back and forth. Like a rough ideal but it take fuel and rpms go up but when letting off at idle again it starts to shake some. I don't remember it doing this before...

Recently removed the heads on my 383. Put everything back together and now have no spark. Know I hooked up my tack wire on the positive and moved it back to the negative side of coil. Replaced the coil thinking it might be bad. Showing low voltage at the coil. Tested the ECU and it test right...

So, need to get my A833 trans. out of my 69 roadrunner to seal replacement. Question is will I have to pull the shifter out of the car or can I just unbolt it from the trannie and work the trans. past it.

Took my cracked head to the Cylinder head shop. Also took them a replacement to be done over. Figured he could use my valves and springs off the old head that only has 4500 miles on them. Left him 288 dollars. Then I get a call it will cost and additional 688 dollars to have the other head done...

Here are the pics. Not as good as I would like but it is what it is.

I recently noticed that the driver side down pipe is hitting my torsion bar. I measured the outside dimension of the pipe with a caliper and came up with 2 inch outside diameter. Everything I read is 2 1/4 inch or larger on a stock runner. With a 383 motor. The pipes are in good shape but if I...

Have been looking and want a coyote buster for my 383 with a Holley 650 four-barrel carb. without the air grabber. I thought they made one but not sure which it is. Oh, this is my 69-road runner. I have just the round pie pan type right now chrome breather bought from O rallies. Appreciate any...

Ok so here is the question. If I had a 1970 charger 500 finished. With 318-A/C- 727 floor shift console. What would you say the price of it would be finished.

Has anyone been watching that 68 black charger for sale on E bay. Don't know if it worth the money people are bidding on it. Any ideas are appreciated on price and the shape of the car.

Has anyone tired the Summit Sum-4918 radiator fan. Bought a new fan from Speed way motors and it is just like the one I have now. The tip's of the fan turns towards the radiator. Going to send it back and try the Summit one. Not running a clutch for the fan just straight drive with spacer. Any...