Search results for query: *

Just purchased a Vevor borescope from Amazon for about $60 and so far very happy with it. Build quality and image quality seem very good. Rechargeable, long camera cord, three lenses on a 8mm dia tip (front and two sides all with lights) and even comes with a 32 gig micro sd card. Here’s two...

Finally purchased a borescope and this is what I saw. I assume this is due to detonation which I’ve been struggling with occasionally. Can anyone confirm by this pic?

Working on a buddies car that is burning oil on one side only after it warms up and when I pulled the plugs front cylinder on passenger side had a lot of oil on the plug. Took the valve cover off and removed the valve springs to check the seals and they looked great (tight fit and very soft) but...

Looking for a passenger side rear quarter glass brace for a 67 Coronet hardtop. Picture shown for reference is from my drivers side. Ship to me 53142 zip. Thanks

Stumbled across an auction of Mr Norms stuff this morning. Just passing it on in case anyone has interest. Hope I’m not breaking any rules and I have no affiliation with it but I thought it was interesting...

Does anyone know if anyone is selling new replacement torsion springs that will fit and (hold up) my 67 Coronet 500 trunk lid? I’ve adjusted to the max setting and took them off and tried to add twist to help with minimal success. It will stay up about half way but that’s it. Any help is...

Hi all, I’m working on a project for a friend and I have a problem with the trans. It’s a ‘73 or ‘74 727 that was put into a ‘69 AMC Javelin with a 401. I hooked up the floor shift linkage and park, reverse and neutral all work fine but the first spot after neutral seems to be 1st gear, the next...

FYI, just called Mo-Par City (815)-732-7751 because someone told me they were still doing business and yes, they answered the phone and said the business is for sale but they are still open and selling. Not sure how long they’ll be there so if you need something, don’t wait!

Working on a project for a friend and I’m looking for advice on what to do about a completely empty 727 tranny that’s in the car. I don’t know much about what was done to the car before I got it but it seems the transmission was installed empty (my guess is no fluid put into the converter...

FYI, I wanted to check how much total advance I was getting but didn’t have timing tape and didn’t want to order online & wait as none of my local shops had what I needed. Found a website where you can print your own! https://www.blocklayer.com/timing-tapeeng.aspx You have options on what dia...

Hi all, I purchased my 67 Coronet late last fall and it seemed to run well. Fast forward to a couple days ago and it died on me a few blocks from home! Long story short, I don’t have any spark. I’m not familiar with the Crane Cams fireball xr3000 ignition system but it seems like it was an ok...

Looking for a retractable seat belt for the passenger side of my 67 Coronet. Bought the car last fall and didn’t realize it as missing (I have the male end).

My trunk wouldn’t stay up due to worn torsion springs (even when moved to the tightest position) so I removed them and added some extra twist to both and re-installed but it still wasn’t enough to keep the lid fully up. I searched the web for new replacements but I couldn’t find them for my...

I’m looking to pick up a dust cover (dust shield, inspection cover) for my 67 Coronet 440 4 speed. I’d could buy the plastic one or the steel re-pop but would rather get a decent used one if you’re not using it!

I’m trying to understand the details on my 440 and could use some help decoding the info on the ID pad. From info I found on moparts.org I believe the C440 means it’s a 67 440 block but I don’t know what the “iron cross” symbol or the “12” “23” “2” numbers mean. Any info would be appreciated!

I need some guidance on the best method to install deck lid torsion bars. They were a little worn out and my deck lid sagged even with both set to the tightest position so I took them out and was able to add some more twist but now I'm struggling with getting them back in. I'm pretty sure the...

Hi Everyone! Just bought my first B Body and joined the site. Looking forward to working on my car over the winter and getting advice from all of you. Right off the bat, can anyone tell me how to read "alerts" and respond to those? Afew of you have already commented on my 67 Coronet and I don't...