Search results for query: *

Background: 1973 Plymouth Satellite, originally a 318/904 car, big block swapped last year with an RV 440/727 Auto. Intended for street driving, will never see the track. Been chasing improvements over the last 12 months, so far: 78 RV Motor, RV had 80k miles. Appears to have at least one...

Looking for factory front lower retractable belts. Uppers are nice if you have them. Prefer black.

Purchased: Pertronix 44011 Flame-Thrower III Ignition Coil, 45,000 Volt 0.32 Ohm, 12 Volt, Black HEI distributor mount Delphi DS10071 Ignition Control Module All brand new. I removed the existing ballast resistor, tied ignition 1&2 together and wired to coil positive and hei module Coil...

Did a 440 swap on my 73 satellite. Have factory big block k frame with proper spool mounts 78 motorhome 440 Factory 78 motorhome pump (bigger pump blades when compared to gates replacement so I left it) 7 blade fan on unknown clutch, might be factory motorhome unit. Mopar factory shroud. Had to...

Title says it all, A727 speedo gear housing and (blue?) 28 tooth gear. Preferably with retaining clip and bolt. Please contact me with what you have, looking for quick ship.

Swapping my 318 for a 78 motorhome 440. Been doing some research and there seems to be LOTS of different options for brackets. My vehicle had a complete working factory AC setup, I would like to retain what I can. Can anyone point me to what I need to get the AC and other accessories mounted...

Does anyone know if someone makes a reproduction harness (or pigtails) for the column side of the wiring? I have a new under dash harness but my column wiring connectors are toast. 1973 Plymouth Satellite

Anyone have any recommendations? I'm in Glenview IL.

Since I can't seem to locate a K frame close enough to me I'm thinking I will have to repair my current one. It's mostly in good shape but the back body mounts are rusted out around the rubber isolator. Does someone have one they can shoot some photos of how these areas are supposed to look...

Replacing a 23+ year old set of trashed headman headers with some hooker super comps and the shift linkage assembly (which never fit well) now won't fit at all. Has anyone figured out the best way to make this work? The brackets are now completely blocked by the primarys. These headers are a...

I recently rebuilt the thermoquad shown below (9097s model). It does not appear to have a vacuum advance port for my distributor. I initially had my distributor connected to the small port (top right in the photo) on the back of the carb before I realized it was a manifold vacuum port. The car...

Looking for 73+ rubber Isolator style unit. Preferably a big block style but small block will do. Would consider a complete assembly with control arms if your looking to sell a whole unit. I'm located near north side Chicago but routinely travel north through Wisconsin to Michigan.

Does anyone know which models have k frames that interchange with a 73 satellite? My k frame is rusted out on the back side of the back tabs. I think it could be fixed but would prefer to get one all ready to swap over before tearing my car apart. Not getting bites on my WTB so looking for some...

I'm watching the rocky road show series that goes through rebuilding a thermoquad. I noticed my float bowl has some damage. Looking for experts to weigh in, seems like areas that won't cause a problem but since I have no experience with these i would prefer to hear from someone who knows better...

My switch seems to be bad, does anyone know if the removal of the low pressure switch releases the freon in the system? Not sure if I need to have it evacuated first.

Can someone direct me to a photo of where the heater valve control cable exits the firewall on a 73 Plymouth satellite? My cars cable is missing and I can't find the spot the replacement would route through the firewall.

Looking for a small block k frame for my 73 Plymouth satellite. Preferably near Chicago north suburbs.

Looking for the scoops that bolt into the hood. I have the small black inserts but need the larger pieces that bolt into the hood.

Looking for a front valence for my 73 Plymouth satellite. Located in Chicago north suburbs.