Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking to buy a clear lense for instrument cluster for 1970 plymouth belvedere as mine was cracked by previous owner. Is anyone have it? Mine is in km/h but mph is also good.
Hey everyone, need an advice on my 727 tf. I am from russia so we dont have a lot of old mopar transmissions here as well as any kind of quality trans or engine shop. But i was lucky enough to buy looks like a NOS big block 727 torqueflite. It has number PK 4193341 7332 5149. It looks super...
Hey everyone. It will be a lot of text as i want to give as much i fo as possible as i dont know which of it can be useful to give me an advice on my questions. First of all i am from russia keep in mind that we dont have proper v8 machine shop here, where you can leave an engine and have it...
Hey everyone. AMD used to sell a kit of fasteners for grill installation. They dont do those anymore. Pn was A-271160 and it is still on their web shop. Is anyone makes similar kits? Or maybe some of you can specify sizes of the fasteners so i can buy those separately?
Hey everyone. Need advices and tips on drivetrain for 1970 belvedere. Used to be a slant six with 3 on the tree and 7 1/4 rear end. Will have 383 with 727tf. First things first, why i am using ford rear end on mopar: i am from saint petersburg russia and it is impossible to find here any heavy...
Hey everyone, here is my 70 (Belvedere) Crewcab Roadrunner. There were 4 of those in Russia since soviet times. Two were cut in pieces and the third one burned down. I found mine in Dagestan totally backyard customized by locals, running on propane. Front end was cut in pieces and welded...
Hey everyone. I have read few threads on this subj but feels like non of them are the same as mine if not please guide me. Thanks.
So i have 2468130-2 number 383 block. It has stock pistons, rods, crank when i bought it. As cylinders needed to be bored i had to change pistons to .030 over. I...
Hey everyone. Looking to buy panels marked on the picture below. Not sure if they should be welded to the fenders ir not but in my case after previous owner that ruined the front end they are just a piece of metal welded all around to fenders and radiator support. So i am looking for an original...
Hey everyone. I am restoring 70 belvedere and previous owner totally destroyed front of the car including areas inside of front fenders where headlight supports are located. Is there anyone who reproduces these panels?
Hey everyone!
I am starting to rebuild my first engine and look for an advise.
What I have:
383 B block #2468130-2
heads from 400/440 #4006452
stock pistons
stock crank
It was a decision made to bore the block to 4.280 after taking all the measurements.
That makes me to buy a set of new...
Hey everyone.
So i have bought mine 1970 belvedere 4 door sedan without a windshield. After some research it appeared that coupe and sedan/wagon have different windshield and seal. A lot of you guys said that Precision seals are the best. The question is what is the right part number for my type...
Hey everybody!
Just send blasted my 1970 Belvedere 4dr. It has some holes here and there so thinking on replacing floor panels partially or all of them. The question is: are floor panels same for 2dr and 4dr? Can i buy panels from 70 roadrunner/satellite?
If there are some tricks and tips on...
Hey everyone.
I am looking to install a windshield on my 70 Plymouth Belvedere. But before that I have to weld some of the rusty wholes. Beside those rusty ones there are three manufacture holes on the bottom of the windshield frame. One on the right, one in the center and one on the left. What...
I have 1970 Plymouth Belvedere. It used to be a Slant6 car with manual 3speed on the column and without power steering. I am planning to swap a 383 with 727tf in it, so i changed a k-member to a bib block k-member that came assembled with power steering box. And in turned out that steering...