Search results for query: *

I have a msd 6AL, msd distributor, coil, wires, the whole setup. I have the small red wire (key power) hooked up and tested it. Great spark following msd testing instructions. However, when I crank the engine to start it, the msd box switches off and I lose spark. I know Chrysler has a key vs...

Having an issue with my right side torsion bar not holding weight as well as the left side. I thought it was an old bar that lost its tension so I purchased brand new PST bars, same issue. They are both installed when bump stops were removed and lower control arm is dropped as much as possible...

Hi, I have a 400 block with TTi 2" x 2 1/8" step headers with a chrysler mini starter part number 3005984 with an 11" flywheel. According to the TTi website the 11" flywheel and ministarter will not fit with these headers. I learned this the hard way and saw my mini starter sitting on the...

I’ve been on the trail of my fathers old 71 demon for quite some time. I’m in Canada but I have a feeling the car may have gone to the US or at least out of my province (Ontario). In Ontario we can get what is called a “buyers package” if we have the vin number which shows all the registered...

Looking for a set of chrome valve covers for 64 sport fury. These came on the street wedge and AMD repopped them for a while. Currently out of stock at AMD but wondering if anyone had a set they would sell. Looking for close to mint or mint condition. Picture below for the correct 64 covers.

Finally completed my stoker build so I thought I’d share. Below is a link to one of the dyno pulls. Results were 624HP and 594 ft-lbs torque. Mechanical water pump and alternator were being driven. Adding my air cleaner dropped to 619HP. ready to drop in the 64 now. Super happy with how this all...

So this is my first time building a non-stockish engine. It’s a 400 to 470 stroker. Harland sharp roller rockers with a custom grind solid flat tappet cam. I’m trying to measure pushrod length to order a set and have never done this before. Read a bunch of articles and they mention push rod to...

New family member! My old man is now back in a b body. Just picked up this 69 Coronet 440. 440ci 727. Red interior buckets and consol. Plan is to make a super bee/a12 clone. Stripping the coronet mouldings but staying black. Want a Red stripe and Black vinyl roof. Picked up an original a12 lift...

Canadian model 1955 Pontiac Pathfinder. Basically a 55 Chev with different front and rear. 350ci chev engine (70 Monte Carlo), automatic floor shift, tripower, aluminum rad, nice paint, nice interior, front power disk brakes, new suspension, 15" torque thrust Ds, new tires, new 2.25" exhaust...

In the process of purchasing a 440 coronet that I would like to convert to a super bee. Are the grills the same? Classic industries has them as two different part numbers but they look the same to me. Maybe the mounting tabs for the super bee emblem are different? Would like to keep the coronet...

Hi, looking for the trim that goes along the b piller of a 69 coronet dividing the vinyl top and the body. Would like it to be minty. Let me know if you have them and want to sell. Thanks, -Steve

Reposting these now that Americans can drive into Canada (borders open). I have a pair of 63-65 b body AMD full quarters still in original boxes for sale. AMD no longer makes these. I just put a set on my 64 Plymouth hardtop and they fit very nice. Will not separate to sell just one side. I...

Hi, I’m in the process of buying a 69 440 coronet. The guy has what he claims is an original a12 lift off hood which is also for sale. I want to buy the hood in case I decide to make an a12 clone one day. Is there a way to verify if one is an original Chrysler product versus a repop? Do they...

I finally received my TF240 heads after about 5 months of backlog. They are super nice and will be taking them to my machinest/engine builder to run the actual flow numbers and give them a once over. I noticed the ports have a texture to them (not polished smooth) from whatever method they use...

I’m looking to put a 3” stainless (hopefully) exhaust on my 64 sport fury. It will be headers back. Typical for the early b bodies, no one makes a complete exhaust besides tti. I’m looking for stainless which I don’t think tti offers. Companies like Pypes, Magnaflow, etc sell exhaust systems for...

I’m looking for a gas tank sending unit for my 64 Plymouth. Looking for 3/8” line instead of the stock 5/16” as the engine will have decent HP. Running a mechanical Edelbrock performer RPM fuel pump on the engine. Any recommendations for tank unit? Not sure who makes them. thanks, -Steve

I have a pair of 63-65 b body AMD full quarters still in original boxes for sale. AMD no longer makes these. I just put a set on my 64 Plymouth hardtop and they fit very nice. Will not separate to sell just one side. I don’t want to be responsible for shipping but feel free to send a courier to...

Here is my 64 sport fury I purchased 5 years ago (wrong trim I know). From far the paint looks ok but up close it’s 40 year old lacquer that needs to go. Also some hidden secrets underneath like horrible mini tubs that warped the quarters. Thought I would just share some of my adventure.

I’m finally getting around to finishing my 400 to 470 stroker. Bottom end has been done for over a year but covid put a bit of a hold on things. I’m a bit of a rookie with this high performance stuff. I’ve read a lot of back and forth about breaking in the engine. I know to use proper break in...

Finally managed to find some quarter panels for my car but now realize I need a rear left (drivers) outer wheel housing. AMD made them for a while but willing to use good used sheet metal as well. They should be the same for 63-65 b body Plymouth and dodge. Not sure if a 4 door is the same but...