• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. FueledGarage

    Wipers 3 speed switch with 2 speed motor wiring

    Thanks, I was able to get high to work but can't get low. I wonder if I need to jump the restistor. I will keep at it.
  2. FueledGarage

    Wire crimpers that work

    Some general comments/observations. The "old reliable" pictured is the best crimper for insulated connectors. I've never heard of soldering insulated connectors. For OEM non-insulated type connectors that the OP is referring to, the AAW crimpers work well. I have those as well as some Paladin...
  3. FueledGarage

    Wipers 3 speed switch with 2 speed motor wiring

    Hello, Looking for some more wiring help from the Mopar experts. Taking over all of the final details from a builder that got tired of this project and left many, many loose ends. We ended up with a 3 speed wiper switch and a 2 speed wiper motor. Can anyone provide the wiring to make this work...
  4. FueledGarage

    Need help with IGN1 and IGN2 on full custom build

    Thank you for the reply! I ended up connecting them together to the ignition relay and diode isolated the 2. Strange thing is that with my DMM the ST and IGN 2 terminals on the switch show continuity with each other in the crank position. Just for the hell of it I tried connecting them together...
  5. FueledGarage

    Need help with IGN1 and IGN2 on full custom build

    I hope someone sees this that knows what’s up. I thought popping an ignition switch in the car would be a simple job and now I’m stuck. I think I could connect both IGN1 and IGN2 to my ignition relay with a diode in-line on each wire and that would solve it. I’m worried about diode size now. 3...
  6. FueledGarage

    Need help with IGN1 and IGN2 on full custom build

    I need some help wiring a stock reproduction ignition switch (in dash) in a 69 Charger. The harness is a Painless b-body harness and engine is. 440 with MSD 6AL and FITECH EFI. It had a Touch N Go start which I️ am replacing because it is more trouble than it’s worth. Since the touch n go had...
  7. FueledGarage

    69 Charger dash ignition switch replacement

    I would like to know if ANYONE sells replacement OEM connector housings for these cars (60s Mopars). Someone on this forum must know! American Autowire makes a complete B-Body harness with all the connectors. Someone told me they buy them (connectors) from Year One. I can't find connectors only...
  8. FueledGarage

    69 Charger dash ignition switch replacement

    Thanks for the tip. Any thoughts on the connectors for the hazard and headlight switch connector housings? Other cars that are the same because Chargers and Roadrunners are not easy to find as I'm sure you know.
  9. FueledGarage

    69 Charger dash ignition switch replacement

    I am looking for all the parts needed for a dash mounted ignition switch. I wired my friends 69 Charger with a touch n go push button start and it doesnt work great so we are going to go back to an ignition switch. The car was a project and we never had a switch to start with so I am looking for...
  10. FueledGarage

    2 speed to 3 speed wiper motor swap

    Let me know when you are back. We are not in a huge hurry. Lots to do on the car still.
  11. FueledGarage

    2 speed to 3 speed wiper motor swap

    Do you have any 2-speed parts you want to get rid of? We are piecing a 2-speed system together and need a switch and motor arm and bushing. Do you know if the arm is the same for 2-speed and 3-speed and just the bushing is different? Thanks, Toby
  12. FueledGarage

    Wiper system question and dash connectors

    Hello, I have 2 questions for a 69 Charger. 1. Can I use a 2-speed motor with a 3-speed switch? We are helping a friend but his car back together and I had a 3-speed switch laying around and I thought we were going with a 3-speed setup but when I wasn't looking he bought a 2-speed motor. Money...
  13. FueledGarage

    Help sourcing female 6-pin connector for tail light harness

    Thanks, I guess that it is a Delphi/Packard 56. I have several Pack56 housings but not a 6-pin so I don't have a way to check but it looks to be the same so I will order some up and see if it works. Thanks!
  14. FueledGarage

    Help sourcing female 6-pin connector for tail light harness

    i have a 69 Charger that has a Painless B-body harness in it along with a tail light harness from Classic Industries. The tail light harness has a 6-pin male connector that looks similar to a Packard 56 connector but I think it's a little different. I am looking for the femal side to attach to...
  15. FueledGarage

    1969 Charger clutch safety switch recommendation

    Thanks for the info. This is a full custom build with a trunk mounted battery and starter solenoid so I just need the normally closed clutch safety. The pedal bracket is about the only thing on the car that is still stock so I thought maybe there was a switch that mounted somewhere on the pedal...
  16. FueledGarage

    1969 Charger clutch safety switch recommendation

    im looking for the correct clutch safety switch for a '69 Dodge Charger. Did it come with one from the factory or will I just make something off the clutch pedal bracket and get a generic switch. Thanks! Toby
  17. FueledGarage

    OEM connector source

    Thanks, I should be able to find the headlight connector. Having trouble with the female side of the rear light harness. Classic sells the rear harness but I have no idea what the female connector is. It looks like a 6-pin with 5 pins populated. Can someone tell me if it is a Packard 56?
  18. FueledGarage

    OEM connector source

    Hi, I am hoping someone can point me in the right direction. I am looking for a source to get some of the OEM replacement connectors for a '69 Charger. I am really tired of doing a Google search just to have Classic Ind. keep coming up because they don't have anything tough to find like...
  19. FueledGarage

    FOR SALE Mopar parts years of collecting

    I am looking for the front turn signal housings (I have the lenses) and many interior parts. Interior parts needed are all the lower dash cover panels, AC center vent, glove box door and ignition switch bezel.
  20. FueledGarage

    Dodge 4-speed trans connectors

    Hello, I am wiring a '69 Charger with a 4-speed manual. There are 2 connectors on the transmission. I am assuming the one on the driver's side (first photo) is the reverse switch? It has 2 threaded posts for the connections. The connector on the passenger side looks almost like a GM connector...
Back
Top