Search results for query: *

1973 Road Runner - 440 - 5 speed pistol grip Hurst shifter $ 25,900 I have owned this Road Runner since 2007, it’s a real Road Runner and I have invested over $25,000 in parts alone (RM21H3G). It was a 340 4 speed car and was converted to a big block the right way with a big block k frame. The...

So I have a date coded 72 440 block stroked out to 522 by a professional engine builder and extremely happy with the results. Its got a mild cam something like a 440 sixpack cam and its basically a street car - no racing. It has edelbrock alum heads performer RPM. See the attached photo for the...

Looking to sell US Car Tool Mopar K-Frame Stand Drivetrain Restoration Tool and US Car Tool Uni-Lift Unibody Front End lifting tool Both brand new, never used, but opened & assembled. Bought for $600 + delivery, sell for $450 cash only. Local pick up no shipping, near Raceway Park Old Bridge...

Looking for a front drivers side remote control handle which is inside of the door trim panel. See attached photo or 73 body service manual section 3-31 figure 16 and 17, its called remote control handle - the spring on mine is broken. Send email with cost and price with photo Thanks...

I am repainting my engine compartment on my 73 RR. Is the heater box fan that protrudes into the engine compartment body color or left a black color ? Thanks for your help.

I am doing a complete restoration of my suspension on my 73 RR. Just put in the k frame after powder coating everything going smoothly until I tryed to remove the old LCA ball joints. The service manual states they are screwed in like the uppers which I already removed. The existing LCA...

I have a Tremec TKO 600 in my car and its hard to shift from 1st to 2nd and also grinds into reverse. I bought the kit from Keisler for my 73 B body back in 2009 and it only has about 3,500 miles on it. I am running a McLeod dual disc clutch. Someone told me that the dual disc maybe the issue...

I have a 8 3/4" rear end that just came out of my 73RR a couple of weeks ago 489 case 323 posi rear end with brakes etc complete - working in good condition. What is it worth ? thanks Ralph

Just installed a new Moser Dana in my 73RR and was wondering if I need a longer rear axle brake hose. I bought a new rear brake hose which come with an integral tee block but it looks short for the dana which is Year one " AQ63" Should I buy a hose for a 70-71 model B body ? Any help...

I have a driveshaft with a Mopar 7290 u joint and will be getting a dana rear end with a 1350 series pinion yoke. How do I mate these up correctly Do I just buy a 1350 u joint and have it pressed in ? how do you install and will it fit ? Thanks for the help as usual.. ralph

I am looking for someone familiar with rebuilding a 727 transmission out of my cuda. I bought all the parts etc and need someone who is expert in these older transmission rebuilds. Looking in the NJ area zip 07726 and I am near Old Bridge Raceway Park (central NJ). Any help would be...

Need some advice Talking to a good engine builder for a performance build on a 73 stock 340. He states about 340 horsepower in total and driveable with good vacuum for ps,pb and ac 15-16 hg He will blueprint and balance etc and give me 9.5 to 1 compression with stock heads - want it to...

Just installed a set of new front wilwood 4 piston brakes on my 73 RR. The car is a factory front disc / rear brake combo. After I installed and bleed them the parking brake light would not go out. Checking the manual I understood that there is a procedure of how to bleed the brakes and I...

What is the correct paint for a factory k frame for a 1973 plymouth RR. I have a correct k frame to put in the my car and i want to have in sandblasted and powdercoated first. I assume it would be semi gloss black but would like to know what the factory did. Who can provide me with the...

I have a 73RR with a 522 stroker and 5 spd - 3" exhaust. Makes atlot of torque around 640 and about 500 to 550 horespower. Do not run it on the track more of a classic touring car. I am planning to put in a new rear from Moser (with eaton true trac) with 3.54 gears with rear wilwood rear...

I need to replace the door hinges on my 73 rr one is damaged and drooping alot, so i decided to change both of them. I bought new hinges from AMD and will paint them body color and install. Some threads mentioned taking off the fenders to accomplish this - do i need to do this on a 73 RR ...

Does it matter which size hose mates up to the water pump housing. I have a 73 RR with a mopar hi po pump and it has two opening for the fitting at different locations - see photo. Does the 5/8" hose go inboard of the pump or does the 1/2" hose. I have heard that if its not correct you will...

Saw this car and trying to help the Owner John who wanted some help selling his car. 1973 Plymouth Road Runner 340 - 4 spd pistol grip car, nice condition. Body in great shape and repainted some time ago. Owner stated matching numbers and possible California car. If you have an interest call...

I bought a new alum radiator and mopar performance water pump and housing and understand from some other threads that there is a way to plumb them in. I ave a 73 RR big block without air and it has a 1/2 " hose & 5/8" hose going to the heater core. I also want to have a water temp gauge...

I have aluminum heads on my 1973 RR 440 and decided to buy a aluminum radiator from champion for it. They stated I should use ethylene glycol anti freeze and distilled water for aluminum radiators. I looked at the auto parts store and they all have other ingredients added besides the ethylene...