Search results for query: *

Long story short after a year of trying I have given up on a bolt on fiber glass hood, it would seem no one can make one that can handle any kind of heat or be even remotely close with their design to something that would actually fit a car. So I'm now trying to find if, they even exist, a...

It's called the quarter panel extension, there are some gaskets made to go between them and the quarter however i found none of them are sufficient in sealing off the end as well it will at times take a lot of modification of the extensions to fit the quarter panels shape because of such...

The good news is I've gotten word through the food chain that the issues, Jamie is it?, has been having with the reverse shifter linkage have been more or less resolved. They got it to fit and work smoothly. So sure, I won't hold my breath (god knows the fumes from the shop won't allow it...

Does anyone have an idea as to when the Passon 5 speed will be available? The only release posts i can find are from 2010 saying "this spring" but now its 2013 and still no news, does anybody have one? Has anybody else fixed the modify the entire floor pan problem with other trany's? My girls...

On the related note of power steering leakage, I've got a power steering pump and close ratio box from firm feel, the pump is leaking after less than a hundred miles on the Odometer since installation. I cleaned the front face and hoses of the pump, and let her sit for a few hours, the leak was...

the gauge might be dead because of a disconnect at the tank or on the plug to connect the harness in the rear to the dash harness, check behind the dash to see that everything is still connected, check yer fuses. i can't imagine this being it, but draining the tank dry could have somehow messed...

i know it's a bit late and the problem is fixed, but do you think it could have been that the engine was not able to handle the amount of fuel? i know my 383 has a hot cam in her (yours of course as mentioned was stock) but she won't run with any carburetor except with what she has because the...

add some oil works the same for squeaky brakes! kidding kidding, you can try check the alignment, but also look for paint on the belt rubbing off from the pulley, sometimes the paint acts as the semi-lubricant and is what squeals. all else fails tighten the belt, she may be too lose. as a worst...

thank you very much, how high did you have to lift the front end to get it underneath? (just an estimate)

GM is the best when it comes to the amperage capability and i know it's not much but also style, the bad news is the mounting patterns don't always match, had to modify my brackets and make an new lower one, but it looks better than stock and 140 Amps push makes it worth the extra hassle. try...

Quick question to anyone who owns a 440 6-pack car with a Ch-6 highrise intake manifold. How tall is the whole assembly from the bottom of the k-member or oil pan if it sits lower to the top of the carburetors? I need to know if I can lift the front end high enough to sneak her under the...

it's like helping give birth to a sharp octopus in reverse 3-4 times depending on how you manage to measure everything. my advice is to keep the old harness for reference on length and make sure the wires are warm before you try and move them about when all bundled together. also don't black...

if i can add some input, backyard buddy has my vote when it comes to reliability and assured safety. can't go wrong with the locking dogs as well as the collar style post and rider design.

any way you can provide some design specs on that cradle? would that fit a 440? was thinking of putting my engine in the same way but couldn't find an engine cradle low enough to sneak under the front radiator frame, all of them would require the k member to not be on and the car to be lifted so...

rebuild it man, AMD style if you have the cash, nothing is better than having a ride you put yer blood sweat and tears into. puts more pride in the thunder she brings, i can imagine that being one beautiful beast once all the bad panels have been fixed or replaced. be lucky that AMD has the...

maybe not the cause but if the switch is heating up it could be shorting across that and keeping the lights on, won't explain the change in brightness when turned but it's a good place to start. yer best best is to rip it all out and start a new before something lights up and you lose yer car to...

not entirely sure if they will fit, i don't see why not since the seat design was only changed in 69 to support a shorter top back section and locking clasp on the bottom. though i say hard to tell since my 66-67 seats came out of the 69 coronet with the floor pan Swiss cheesed from all the...

just remember with black you have to have every body line straight and smooth or they will stick out like ford at a mopar meet. with red yer looking at a boatload in cost for the paint but a damn sharp looking car, my vote is on the red with the gloss black stripes (gloss stripes give a sleek...

thanks guys, y'all been a big help!

Looking at some pictures of what a str-14 manifold is I can say it's definitely not one of those, sadly though I don't have the manifold with me at the moment so I can't say what it is other than that is is a repro of the stock manifold, made by Edelbrock and is a simple 3x2 set-up nothing...