Search results for query: *

Thanks guys! so no need to worry then! Actually i´ll just be replacing the oil seal.

Hello! Can someone tell me if this is right? I remover the seal in the end of the trans and there is a small hole on the side of the bushing.

Hi there, I´, a bit confused, trying to figure out my shifting problem.. The question I have is, Why are the shifter mechanism for -69 and -70 cars different? I also noticed that the linkage is different? I guess what it boiles down to is: Are the transmissions different from year to...

Thanks for the advice guys, well sounds like a bit of a hassle, bending the float and all, I hope you can get the float out, with the tank in place, maybe i´ll give it a try, i let you know.. /Linus

Hello, My fuel gauge is not showing the accurate level of fuel in the tank, Full tank will show about half on the gauge. The sending unit, and tank is new, and the sending unit was checked prior to installation, giving the accurate reading in the gauge... I also did measure the resistance...

Ok, yes I´ve had that in mind... have you tried that? Any problems.. föresten kan vi snacka svenska...:eek:? /Linus

Hi I'm giong to california for the 1st time tis summer, are there any good mopar parts dealers there? I'm looking for hurst shifters! Linus

I took the cable back to the store, they said it was probably not done right in the first placering, I got a new one so problem solved! To bad i didnt realize it in the first place, save me some time and effort! /linus

Not 100% sure actually, it would bee a great help if U could take a look a youre cable! Hers another pic, as you see the whole in the nut as smaller than the "thing" surrunding the wire...

heres a pic of the cable I bought, supposed to fit..didnt.. as U can see the wire dosent connect with the hole in the adaptor..

ok thats intresting, mine has to, but the "bolt" dosnt goes over the thing that surrounds the wire...if u understand how i mean.. I´ll send a pic later..

thanks for the quick response! now i know, dont looks like the one i bought:(

Hi, could someone please post a pict of the speedometer cable, the end that mounts in the trans, that would be a great help! Car is a 1970 roadrunner, 4-spd. /Linus

Tank is in place now, the new straps did it, the old ones didnt fit the new tank I suppose, I`ll be more careful where I buy stuff hereon no more china crap! /Linus

Thanks "72RoadrunnerGTX" then thats the bracket/bolt I need! Do you know if the waterpump/pulley is the same or do I need to change that to? /Linus

Hi there! I was going to buy the alternator pivot bolt..(mine was missing, had just bolt and nut..) Ordered it from Year1, got it and it didnt fit at all, whats wrong..? I got two bolts, three spacers, but I figure that I just need one bolt and two spacers.. The car is a non AC, at least...

Thanks thats great! Could you get at closer wiew so you can make out exactly how the carpet on the cover attaches to the rest of the console..that would be a GREAT help! /Linus

Come on You 4-spd guys! Show me youre stuff!

Thanks Uk-maxie I´ll look in to that! Good site! I also need to know how the plastic cover on the driver side is supposed to be attached??

Hello, I´m putting a 4-spd console together, could someone please post some pictures from the drivers side! I need to know how to attach the cover/carpet on that side.