Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need to do my wheel wells and inside of quarter panels, I don` need concours correct but want it to look pretty close to the factory stuff. Resto Rick says one gallon and a quart to one gallon and a half to do all that but is only sold by the gallon so I would need two gallons at $103 a piece...
I have the firewall diagram but want to figure out which holes are factory and which ones are not as previous owner(s) drilled a bunch of "extra" ones.
I found what looks like sprayed black paint on outside of the front frame rails near the control arm mounts. I would have just ignored it thinking some previous owner spray canned it but when I removed the lower rubber bump stop I could see it was there before it was installed. Judging by the...
Getting ready to spray my undercariage on my `70 road runner and need info on the bolt on dual exhaust hanger - was it bolted on before or after undercarriage was primered and if after what is the correct finish for the hanger and nuts?
I am currently having lot`s of fun (NOT!) cleaning and sanding the underneath of my road runner getting it ready for paint. I want to replicate the factory look which means gray primer with body color overspray, I`m not looking for concours points but just want it close with as few different...
Can someone measure thier quarter panel from edge of door jamb to edge of extension right along the top edge? I am doing final fitting and my AMD panel seems to be just a bit long making my door gap too tight. I`m not sure if I just need to adjust it back a bit or it`s longer than factory and I...
OK, I`ve done plenty of glass R&I but how do I get out the quarter glass on my `70 road runner? I`ve removed one screw in the rear corner and three screws along the front edge - am I missing something or is it just stuck? Also need a trick to hold the outside chrome pop out button from spinning...
I see a couple raised areas that my original doesn`t have but my center area was cut out by a previous owner. Anyone have pics of a factory `70 floor or can show me what inaccuracies there are in the AMD part?
A guy is trying to tell me the tail stripe was standard on all `70 road runners regardless of having decor package or not and if it doesn`t have a stripe it is deleted, is that true? My `70 has no decor package, medium grade interior and no stripes.
Anyone have a bird wing they could measure for me? I need the overall height, length top and bottom of uprights. I have a ratty `73 I`m going to make a sort of Joe Dirt car out of to drive and have fun with.