Search results for query: *

So i went to move the other day and my car was acting like it was slipping.. i checked fluid. was about a quart low.. filled it up and ran fine.. well while it was idling it was dripping tranny fluid... my pan and bellhousing has always been wet, but i thought it was rear oil pan leaking... i...

Who has run 273 rockers on there 360? So I primed and turned engine over and primed and I didn't get no gusher like with stock rockers. I did this for over an hr. Many rotations of the engine. I got little trails from top hole, some of the rear holes oiled(not all) some dripped underneath. I...

I'm building a 360 with stock bottom end, Hughes whiplash hydraulic cam with sidewinder aluminum heads.. fel pro 1008 head gasket(0.039 thickness).. i have stock stamped rockers or a choice of 273 adjustable rockers.. i need to find correct pushrod height as I'm unsure if stock pushrods will...

So took a pair of 587 heads i had on shelf to machine shop this weekend and no go.. so my question is have this fresh 360 short block 0.060 over, fresh 318 heads(pictured). how shitty will this thing run with the stock cam? can i run a mild cam with the 318 heads and stock springs or would that...

where is the best place to buy stock small block valves? i need 1.88 intake and 1.66 exhaust valves for a pair of 587 heads... this is a stock bottom end motor, with comp xe274H and Weiand intake unless i can find a little smaller cam so i don't have to run double springs... so i dodnt see a...

so i have this cam i want to put in my 360... is there another spring i can run other than the comp double springs(995-16).. i already have new seals and would want to have to buy Viton seals just to run the double springs... cam is comp CL20-224-4. XE274H-10 @50 230/236 intake .488...

73 charger , mild small block, weekend and occasional cruising , is stock ignition fine or ignition box better? i see so many run the ignition box just to eliminate the ecu and the ballast resistor since they overheat and fail... i was just curious on yall's opinion on what your running. pros...

so i'm building a 360 and looking for opinions 73 charger, headers, dual exhaust, 2800 stall, reverse manual vb, 3:55 gears stock bottom end 587 or 596 heads what would be a good cam and intake to run with this.. i would like some noticeable hp and torque. this is not a race car, just a...

I can't find a good used 8.25 sure grip for the life of me.. Going from 2.79 to 3.55 would like to get rid of the one legger... I was looking at the lunchbox lockers. Are they good for street driving? I have heard they engage hard. This car driven on weekends, to shows, occasional cruise. Never...

im in need of a sure grip for a 27 spline 8.25.. i know alot of jeeps and dakotas had them from factory,but what year model did they switch to 29 spline?

I've got a 1973 dodge charger with a tired number matching 318. Running a built 904. LA motors are getting harder and harder to find, but magnums are readily available. I want something around 320-350 hp. I hear it's alot easier to get with magnum motors. I know factory heads on mags are bad...

Ok I have tried different things and I think maybe the govenor is stuck. Got a 904 that was rebuilt and it sat a year. Has a 2800 stall and B&m street/strip kit. P,R,N,D,2 all work fine but it will not shift into first manually or take off in first when in drive and it will not downshift when...

I just put a rebuilt (about I months ago) 904 transmission in my charger with a 2800 stall. It will go through all the gears on column except low. You have to slam colum to get it in low(sloppy linkage) . My problem is it will go I reverse and drive correct and when you get it in low it...

im building a 360. i have some h405cp pistons coming. other than that bottom end is stock with a 4.040 bore. i have 3 head options. 915 J's, 596 or magnums. cam im looking at something like a comp xe268 or 270, not sure on intake,but carb will be a 850 TQ tuned for a mild 360. im wanting to make...

i have a 73 dodge charger, 318 with automatic, currently building a 360. it has a 904 auto, i want to convert it to a 4 speed or 5 speed if possible. who has experience? what all parts would i need to complete the job? did these come with pistol grips?

i have a 73 charger and im buildng a budget 360 for it. my goal is at least 350 hp. here is what i got with the motor, stock block bored .40,stock crank,rods. pistons are sealed power(ch 1.576), cam is a Erson TQ20T(gonna get replaced), stock 596 smog heads with aftermarket...

I recently picked up a 440. It's bored .30 over and crank is .30/.30. Ly Rods have been butchered and Keith black hypers have been beat-up. I am on work comp from a work injury last year where I fell 20' and had to learn to walk again. Anyone have any rods or pistons laying around not...

I have a chance to purchase a '77 model 440/727 combo. Either truck or rv. I currently have a 73 charger with a 318/904 and 8 1/4 rear. I know I will have to upgrade rear end eventually. First off I can get this combo(motor disassembled) for $400. Is that a fair price. Next I would like to...

Ok first of I'm running a 318,with a 290 duration, 484 lift. 1.60/2.02 valves, edlebrock intake and 4 barrel with headers. Probably around 250-275,hp. I have an 8 1/4 rear end with with 2:76 or 2:91 gears. I have a guy sending me a Set of 3:91 with install kit for like $130,shipped. Brand new...

I am wanting to buy this cause the price is right for me. He says it came of a 73 charger 318 2barrel with a 904,but mine now has a 4 barrel. Will this still work?,,,I know Lokar is best way. To go,but unless y'all have a set up for sale I can afford can't get one cause new with. Carburetor...