• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. R

    Hydraulic lifter pre-load

    Finally got the TF 270 heads on, the hughes 1.6 rockers on, and the pushrods in. Cam is comp hydraulic flat .545 241/247 (.581 with the 1.6 rockers) and comp lifters. Comp calling for .045 lifter preload. Seems like an awful lot of preload. Thinking the trick is to keep the inner plunger off...
  2. R

    Perf 440 build - Pushrod Question(s)

    Just measuring the pushrods for my 440 - they seem REALLY long. Build: '70 440 decked .010 Icon FHR pistons .060 over (about 10.4 to 1 by my calc) Comp cams Hydraulic flat tappett .545/.545 .247/.241 Hughes 1.6 adjustable roller rockers (makes cam .581 lift) Trick Flow 270 Heads at 0 lash the...
  3. R

    Valve Springs and Cam - racer questions

    I am assembling my 440 and have run into a few things on the valvesprings/cam. So 2x questions - which springs and which locks? I have the Trick Flow 270 heads - the 801-C01. The valvesprings on the head are as follows: 1.460" O.D. dual spring with damper (TFS-16893) 120 lbs. @ 1.900"...
  4. R

    Timing problems - can't see dampener mark on timing tab (440 internal bal)

    1974 440 internal balance. Can't see the timing mark on the balancer when setting the timing - I painted the only line on the balancer that is there with white paint and it still doesn't show up when trying to set timing. Wondering if this one has spun? Thinking I'll need to order one if I...
  5. R

    Carburetor suggestions - 625 or 750?

    Finally got the 440 back together on my '74 triple black Charger. It fired right up. Carb leaks pretty badly - I need to break in the cam but don't want to use the TQ with the leaks. It looks like it's been "rebuilt" at some pint with lots of orange RTV. I think that carb goes into the...
  6. R

    MP cast valvecover...holy PITA!!!

    So trying to get the MP cast aluminum valve covers installed on my 440...what a joke. Bought the grommet kit from MP and the grommets fit the EXISTING holes! I have no source for the MP VC punch out hole grommets! My 74 needs 3 holes - PCV, Breather and filler...WTF? Anyone have a solution...
  7. R

    1974 440 Front of Motor - Brackets and Bolts! A/C car!

    My 1974 Charger has a heap of "crap", err I mean parts in a box for the front of the motor. They were in the process of installing an underdrive aluminum pulley set. So I'm looking for a schematic of how this stuff goes together and a source for the missing stuff. My car is A/C and P/S. I...
Back
Top