Search results for query: *

I'm running into some electrical gremlins that appeared all at once. My voltage readings drop to the "Discharge" range when I turn the parking lights on (light knob pulled out half way), and they drop big when headlights are turned on (light knob pulled out all the way). Turn signals are suuuper...

Hello all, My saggy old window switch finally gave out, I had a switch from a 79 Chrysler Cordova on standby for just this occasion. 74 and 79 switches have a different order but the color coding is still the same on the wires that lead to the window motors. I used my multimeter to figure out...

The FSM says that continuity should show between the 2 outer prongs of the 3 pronged switch only when the transmission is in reverse. I get no continuity readings from the switch at any time so I'm thinking it's bad. Neutral safety tests check good btw. Just for the fun of it I wanted to see if...

Hi all, turn signals don't work. Replaced flashers, fuses are good, scrubbed some contacts, nothing so far. I want to factor out the switch. Since it requires special tools (steering wheel puller) to get into the turn signal switch I was wondering if I can intercept the wiring before it goes...

Hello all, I have some ratty old door panels and was thinking about getting just any generic aftermarket window switch to replace the current one which has a short in it. I can only find a $125 replacement on ebay. It's OEM but I'm not looking to do a show room restoration. Will something like...

Here's a strange one. I guess by coincidence the old motor only functioned one way (tested it when I pulled it out). I replaced the motor and now the window goes up and down when power is applied directly. However if I do either passenger side or driver side switches, it will only go down. This...

Hello all, Any reason why connecting a previously installed after market tach to the acc section on the fuse box ruin the starter relay? I was thinking the previous owner had the tach disconnected for a reason so I made sure to ask him what the deal was before messing with it. He said he...

I just want to ensure that as long I index my rotor position everything will be fine. I saw a YouTube video where the guy mentioned gears within the engine shifting once the distributor shaft if lifted out and having to manually crank the engine to get #1 at TDC. The OEM manual warns that if...

Just thinking out loud here, please feel free to correct me: Did the gauge sweep test by removing the sending unit wire from behind the oil and fuel gauges and attached em to a good ground. Turned ignition key to on: Fuel Gauge = Complete sweep Oil Gauge = Completely dead ***Oil gauge needs...

Parking lights work normally. Brake function work normally. If I do emergency flashers it will light up indicators in the gauge cluster but neither front nor back exterior lights will flash. When I signal left or right nothing happens with the gauge cluster indicator or exterior lights. I read...