Search results for query: *

The parts in photos are off of the bottom rear of a 1968 Dodge Charger. Did the 1967 Dodge Charger also have this part? Thanks!

What vendors sell the mounting bolts for all of the seat belts for a 1967 Dodge Charger? Thanks!

Does any vendor make the stainless steel bottom grill molding for a 1967 Dodge Charger? If not, are there any vendors that can remove scratches and dents and replate the molding? Mine doesn't look very good. Thanks!

Where does this seat belt holder attached to? Is it for the front or rear seats? I need to know the exact location. Thanks!

Owners manual says not to use aluminum base bulbs. I am having trouble finding brass base bulbs. What is the problem with aluminum base? Thanks!

My 1967 Dodge Charger bracket that is welded in the middle of the spare tire opening is missing. A bolt hooks on this bracket and then goes through the spare tire with a large wing nut on top that secures the spare tire to the trunk floor. Could someone on the forum send me a photo of what...

Received 4 clamps for the fuel fill elbow hose. I realize 2 at each end, but are they to be spaced out a certain way? Also, why four clamps? Thanks!

What kind of paint can be used on the brushed aluminum by the gear shift? Or is best to leave it alone? However, mine looks bad even after hours of cleaning. Thanks!

What is the correct radial tire size for a 1967 Dodge Charger with 14" rims? Thanks!

Are 1157 and 1034 tail/stop light bulbs the same? I am having difficulty finding 1157. Thanks!

What is the correct size of a Corbin clamp for the bottom radiator hose (non A/C radiator)? Secondly, Snap-On makes a nice tool for Corbin clamps. Where do I purchase one from Snap-On? Thanks!

1967 Dodge Charger Seat Belts: My belts are dark brown and in pretty good shape, but the chrome latches are very rusty. What is my best option? What is the best vendor? Thanks!

1967 Dodge Charger Mag Wheel Cover: I have some corrosion/pits on the spokes. I can probably sand them off, but I am afraid that may remove the textured finish. Any suggestions would be appreciated. Thanks!

1967 Dodge Charger Mag Wheel Cover: I need to paint my mag wheel covers. The black areas look like semi-gloss black. Is the center a gray color? Thanks!

1967 Dodge Charger Trunk Cylinder Lock follow-up: Thanks for all of the input so far. Much appreciated! I have found a 1966 Dodge Charger trunk cylinder lock, but I am missing the key. My locksmith said that there is no way he can get to the tumblers without destroying the chrome face of the...

1967 Dodge Charger Trunk Lock Cylinder and Keys. The photo of the cylinder that vendors show for this car does not look like my original. My retainer is offset and the bezel screws on, not installed with a clip. Who sells the correct one?

1967 Dodge Charger 383 Engine: I need all of the decals that are under the hood and any others that were originally on the car. The decals were gone or in bad shape when I got the car. Where do I find out what decals I need, correct placement of the decals and where they can be purchased...

1967 Dodge Charger: What is the correct color of the metal inside the fuel area? I know some of the area it taken up by the fuel spout. But what is the color on the left, right and behind the spout? Thanks!

1967 Dodge Charger: Question 1: 383 Engine - Does the ground wire go on the right side far back intake manifold bolt or in the hole on the far back right side head? I would need to get a bolt if it goes in that hole. Question 2: I need the chrome trim that surrounds three sides of the hinge...

I need a complete dual exhaust system beginning at the end of the manifold. Who is the best vender to use or would it be better to take straight pipe and bend it where needed? Using the bend option, I will still need two mufflers. Thanks!