Search results for query: *

Bought 69 Roadrunner and just curious if the rear end is an original or aftermarket one. I know it's not original to car it's a 383 car. Here are some pics . Thanks

Just curious what oil everyone is using for 512 stroker street motor oil . All roller and are you using conventional or synthetic

Fresh 512 all roller engine build. Just curious after break innwhat viscosity I should run in it. It's a street car 90%. Should I go with say a 20w50 synthetic race oil or conventional

Already have engine assembled. Just curious if tye Trick Flow cam that comes in there top end kit is able to run a mechanical fuel pump..I have rod in the hole but don't see any movement..?

I'm going to need a new drive shaft my 69 gtx so I want to upgrade pinion yoke at same time. Should I go with a 1350 yoke from Dr. Diff or some other size. I definitely like the u straps over the original straps . It's a 512 stroker 4 speed car may see track some. Thanks

Got a Allstar carb bracket and the stock throttle cable won't work. I would really like to use this but not sure what throttle cable I'd need. There is no way to open bracket up and slide throttle cable into it. Thanks

Looking recommendations for 2 breathers for myblow deck 512 build. Some good ones that don't leak. My buddies using one from Jegs that's a locking style he says doesn't leak but looks funny lol. Thanks

Will a 833 23 spline handle a 505 with 650 torque. Mainly a street car but would be romped on a lot

Has anyone built a stroker and used the trick flow top end kit with good results. I'm getting ready to put together a 512 low deck stroker with the Trick Flow top end package. It's a 10.4 compression street engine. Has anyone dynoed one with good results. Just curious with results I believe...

Ok im pulling the 23 spline 4 speed from my 69 GTX . It's a 68 trans I believe and no it's not original to car. I'm going with a 5 speed Tremec and would like to sell mine . What would be a reasonable asking price for it. Complete 4 speed with all the shifting linking plus the shifter with...

Ok I'm ordering a 512 stroker kit from 440 source tomorrow. The build will be a 400 stroked to a 512. Its going in my 69 GTX 4 speed with 4.10 gear but may switch back to 3.54 . I'm going with a set of Trick Flow 240 set up for a roller cam. Was thinking of using the Trick flow cam that specs at...

Looking for recommendations on what valve covers to get and what valve covers and what Gaskets. Are the stamps steel ones from 440 source good. Need a set for a big block. I bought some blue Moroso steel reinforced gaskets are they good. Looking to eliminate leaks.

In pic shown what is the axle diameter before it tapers at the big end. Thanks..its stock I believe from dr. Diff..

I took the axles out of a car I got. They are Moser axles and I dont believe they have been used at all since install like 17 years ago. Was changing stock bearings for Green Bearings and both axles have what looks like pitting..you cant see it until bearings are off axle. Do you think Moser...

Got a 69 gtx 440 just wondering what intake will fit under stock flat hood. I want to get a aluminium one and not sure what will fit. Will a edelbrock performer fit or holley street dominator. What intake would you get for a small cam 440 3.55 gear 2400 stall.

Ok guys new to site but not Mopars by any means..I bought me a 69 GTX and in the market for some headers and I'm interested in suggestions. Have any of you tried the Summit brand metallic ceramic coated ones price isn't bad. I have some doug's on my Dart and they fit well for a small block and...