Search results for query: *

Anyone in Houston Texas , know a quality, experienced a833 Trans Guy ?

Anyone ported 440 hp exhaust manifolds for racing class requirements and your findings!

Hey Guys, looking at PST lower arm pivot shafts, which do we prefer! And why ? Oops placed in wrong section, needs moved !

Has anyone had a problem with their 5.7 hemi 2012 drain plug creating a leak , maybe some type of damage! Their fix , suggestions!

Hey Guys , will try to be short and to point ! My lifelong buddy ,is and avid classic car guy , not Mopar ,but agent orange is doing a real number on him ! He’s no longer able to clutch his car and has anyone heard or know of a drive by wire system to operate his clutch , so he can still , feel...

After completing a long restoration on my 67 Gtx 440 4/s I continued to have a vibration that was very difficult to track down , tried many things, with the helpful suggestions from the Guys on this site to no avail! The other day i was changing oil and filter and low and behold, looked up...

Anyone have suggestions on rear ujoint caps turning , completed restoration 440 4/s fresh motor trans driveshaft rear differential including yoke rear springs all bushings all frt end parts , spicer joints , but just for info last time on Jacks indexed joints , today index not lined up , help or...

What’s best pcv valve on mildly built 440 , what are you guys using

In my 67 Gtx 8.750 rear diff , is it common to have at least one shaft (passenger side) to have an original axle shaft bent to cause axle and wheel wobble ?

Hey guys , anyone ever had a rear brake drum rub against the backing plate only in one area , and what was your fix ? 11x2.5 brakes rub spot is 4” left side of center on passenger side , changed axle no deference! What as ye !

Working on 67 440 4/s purchased new poly mount but appears to tall ended up with vibration need help pinion angle continues to be a mystery, Cranky can you help

Has anyone ever heard of a forged .30over in 440 collapsing in skirt by .008 due to detonation supposedly , need input from engine gurus , head gasket blown both sides major blow by all started when number 5 porcelain blew out and went downhill fast less than twenty hours on it , up to my ears...

Could us some help with pinion angle calculation on 67 Belvedere 440 with 8.750 rear diff vibration on deceleration at 75 mph

A buddy is wrestling with a broken valve cover stud in 67 440 hp , we understand the traditional manner to remove broken bolts but not working well anyone have any suggestions we have not thought of besides removing the head and having it removed by flashing it !

Anyone ever seen a champion Rj12 blow out like this ? No damage to threads and base still in head all pocelion gone and the plug boot hanging ! What you guys think??

Anyone used Pensoilchromesh oil in there 4/s trans

Back in 68 I installed a crower monarch cam and lifters in a 67 gtx 440 stock rockers and push rods no problem and no noise good duration tans great , blueprint at home no problem,would scream , today my 440 has the best of everything a pro builder could put in it and it sounds like crap idling...

Anyone have issues using comp cam ductile iron adjustable rockers on hydraulic xe274 h cam kit forged piston closed chamber heads being extra noisy