Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi folks,
Rebuilt 383 (4 speed a833) that rotated fine both directions but now that it is installed it will only rotate counter clockwise, like butter - if I try to go the other direction it just locks. I thought maybe it was in gear but no. I feel like it might have something to do with the...
Hi Folks,
I have a 73 Duster, 4 speed I just slammed a 383 in. All I have is the throttle cable poking out the firewall. I need to know what bracketry/kit I would need to purchase?
Running a stock 4bbl manifold and a Edelbrock AVS, 650 CFM. Cheers.
Hey folks,
Installing an A833 into a 69 Charger 383 auto crank with the Brewers roller bearing. Looks like I have a depth of around 1.7” or so. You guys think I still need to trim down the input shaft 5/8” or am I good?
Hi Folks,
Would the earth explode if I used these older 2 BBL style Exhaust manifolds instead of Headers on my 383? What would I be sacrificing? Top end? etc.
- Currently the engine is a 40 over with stock 4BBL manifold, Edelbrock AVS 650 CFM, 516 Heads and a 'stockish' Summit cam. I don't...
I have an A833 4 speed transmission from my 73 Duster and I am wondering what bellhousing, etc I would need to install it to a stockist 383. I have the Schumacher conversion engine mounts already for the swap.
According to the casting numbers, it looks like the trans is a 307 bearing and has a...
Hi Guys, I noticed a piece of the casting at the bottom of my lifter bore is chipped out. Anything to worry about - should I smooth it out with the die grinder?
I think I know the answer but thought I would ask you guys. I am updating a set of stock 516 heads and have a set of 7 degree valve locks and a set of 10 degree valve retainers. Can I use these together or do I need to find some 10 degree locks?
Hi there, I am trying to identify what these numbers mean on these two cams. I figured out its a Comp Cam roller but don't know how to determine the lifts, etc?
#1.
#2.
I am running a Solid Roller Cam (Billet) and just purchased the Melonized Dizzy gear and hardened pushrod from Hughes. Am I good to use the hardened pushrod or do I still need the bronze tip?
I tried several times to ask the Hughes techies but they are impossible to get a hold of and are...