1 PIECE TRUNK FLOOR INSTALL

[Cawley]

Working on a 70 GTX & it needs the trunk floor replaced. The owner got a 1 piece trunk floor. Im not sure how to go about installing it. I never installed a 1 piece just the ones that come in 2 haves. I am going to have both quarters off. Any ideas ?

 

[MWbirdLOVER70]

Then once one quarter off slide pan in and drop offs attach quarter and repeat for the other side I say

 

[69Bee]

I put a '72 Charger floor into my '74 Charger with fixed (louvered) quarter windows. It wasn't fun, but I did it. I kind bent it into a "U" front to back centerline and got it in and turned then put into place.

 

[Kern Dog]

In my '70 Charger, (Jigsaw) I cut the floor pan at the frame rails and only replaced that. It fit through the trunk opening.

The left and right sides of my floor were fine so this was easy for me here.

 

[dadsbee]

Full pan into my Bee without issue..

 

[eldubb440]

remove the tail light panel

 

[493 Mike]

I also did the center only. I was installing a fuel cell, so I did not need attachment points for a tank. Had a friend fab some sheet metal with rolled ribs.
Mike