1964 Dodge ignition switch bezel

[500Hardtop]

Does anyone have the tool to remove or install the bezel on the ignition switch?
Thank you,
Dave

 

[dartforforty]

If it is the same as a 64 Fury, I loosened the bezel by using a pair of needle nose pliers.
Small tips, stuck into the 2 holes on the inside edge to loosen and then unscrew the rest of the way by hand
Ed

 

[500Hardtop]

Thank you dartforforty , good idea

 

[dartforforty]

Check out Classic Industries part #MF1742. Some on ebay also

MF1742 - 1962-74 Mopar; Washer, Wiper, Headlight Dash Switch Bezel Nut Removal Tool
I have this tool it will not fit the ignition bezel

 

[Dan64]

MF1742 - 1962-74 Mopar; Washer, Wiper, Headlight Dash Switch Bezel Nut Removal Tool
I have this tool it will not fit the ignition bezel

I missed that, thanks. I'm going to delete post because i don't want to pass on bad info. Good catch.

 

[QuickBpBp]

Snap ring pliers with the larger tips work fine if it wasn't put on by a gorilla..

 

[500Hardtop]

Thanks for the good ideas!