What size rim and tire do you have?I have 3" TTI pipes all the way to the back bumper. Flowmaster mufflers. A little snug with the inboard springs, but it can be done.
View attachment 807282
Good job 493 Mike! Did you do all the welding yourself?I built a 3" system for my 65. Classic Chambered Exhaust mufflers and resonators.
MikeView attachment 807063 View attachment 807064 View attachment 807065 View attachment 807066 View attachment 807067
Ya. I am still learning MIG but I do quite well with a stick weld. I buy 180* bends and cut out the fittings I need as I progress from front to rear. That way all is full size, same as a mandrel bent system.Anybody done any 3.5" exhaust on a 65?
Good job 493 Mike! Did you do all the welding yourself?
I am thinking of doing the same thing with 3.5" although my MIG welding looks horrendousYa. I am still learning MIG but I do quite well with a stick weld. I buy 180* bends and cut out the fittings I need as I progress from front to rear. That way all is full size, same as a mandrel bent system.
Mike