• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1966 Coronet Center Console Question

Daniel Krause

Well-Known Member
Local time
9:06 PM
Joined
Jan 28, 2021
Messages
123
Reaction score
35
Location
Acworth, Ga.
So, I’ve looked through the parts book with no success. and went ahead and ordered David Wise’s Reference book. In the meantime, can somebody tell me which hardware is used to attach the center console to the cap and extension on the rear? 4 holes.
TIA
 
There's a big steel plate with 4 counter sunk screws. On Chargers they had a large hole in the center.
 
The extension is the frame that sits under the cap and provides structure. The hardware goes through the plate in the extension and through the back of the console. I took it apart a year and a half ago, and somehow the hardware got mixed in with something else
 
If talk about console extension the screw are fairly large phillips head screws. the heads are about 7/16" to 1/2".
 
Think what it threads into is mounded in rear section, no loose nuts. Been awhile.
 
Isn't the steel plate threaded?
 
The holes in the steel plate (“extension” in the parts book) are not threaded in my car
 
Here is a picture of what they look like. All the ones I have seen have the threads in the plate.
66 Console spacer.jpg
 
Auto Transport Service
Back
Top