1967 Hemi GTX restoration

[gtx6970]

General Purpose Screw Washer Bottles, Fuel Seals, etc..., Windshield Washer Bottles, MP-GPS Reproduction, NOS and Used Mopar Muscle Car Parts

 

[hemidart1]

I should have some spare screws I can send you. Let me know if you need them and I'll look.

Thanks for the help! They look and fit perfectly

 

[hemidart1]

Got some dated coded correct belts

 

[hemidart1]

Got the transmission lines in- waiting on the cooler to arrive

 

[hemidart1]

Still looking for one piece of the column shift linkage ….

 

[hemidart1]

Brakes coming together nicely. These are the reproduction rotors from Year One

 

[hemidart1]

Next project piece to work on- straighten the fins on the original trans cooler

 

[hemidart1]

Got the column shift piece from Mancini.
I can’t believe how tight the space is. Don’t know how the exhaust will fit….

 

[Fran Blacker]

They make radiator combs, never used onhttps://www.amazon.com/Conditioner-Condenser-Straightener-Evaporator-Radiator/dp/B07V678SCZ/ref=asc_df_B07V678SCZ?tag=bngsmtphsnus-20&linkCode=df0&hvadid=79920869249902&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583520395866202&psc=1e.

 

[hemidart1]

I did buy that kit !
I worked most of the fins straight but gave it to the rad shop for a final go over

 

[hemidart1]

Well- the exhaust fit !

 

[hemidart1]

This part of the exhaust is original. Had to go with repro tailpipes though.

 

[AR67GTX]

What are the spots on the rear of the oil pan bottom? That’s looking really nice.

 

[hemidart1]

What are the spots on the rear of the oil pan bottom? That’s looking really nice.

Paint drips- I can wet sand them off- but I was told that the oil pans were not painted great from the factory- so I left the drips

 

[hemidart1]

Test fitting the trans cooler- lines need some slight bending to fit

 

[hemidart1]

Rad is in !
And looks like the upper rad hose I got off Amazon (as per info from the Hemi facebook page) fits! I was also lucky enough to get the last shroud from my local Dodge dealer- said it was the last one in Canada on the system

 

[hemidart1]

Now I need to starting making the transmission cooling lines fit.

 

[Fran Blacker]

Rad is in !
And looks like the upper rad hose I got off Amazon (as per info from the Hemi facebook page) fits! I was also lucky enough to get the last shroud from my local Dodge dealer- said it was the last one in Canada on the system

View attachment 1737808

View attachment 1737809

Nice work. Lucky you have a 67, 66 has a different schrod. Wah!Driver's side below has a piece of sheet metal below lower hose, access to hose.

 

[Richard Cranium]

Paint the sides of the radiator supports satin black!

 

[hemidart1]

Paint the sides of the radiator supports satin black!

That’s next on the list