TexasRoadRunner68
Well-Known Member
And so it begins...it’ll be an AMD Charger, but hopefully this one will be saved and done the right way. Starting from the back and working forward.
Hoping to media blast and grind down the welds next. I have Rust Encapsulator platinum for the inside of the rails, hopefully top with weld through primer on welding surfaces and maybe a coat of epoxy primer inside the rails. Then brace the rails and get the crossmember replaced, then trunk pan, etc.
Hoping to media blast and grind down the welds next. I have Rust Encapsulator platinum for the inside of the rails, hopefully top with weld through primer on welding surfaces and maybe a coat of epoxy primer inside the rails. Then brace the rails and get the crossmember replaced, then trunk pan, etc.